Olimpo Informatico

[MK66]

Secondo quello che dice la pagina linkata, non devi cambiare ma aggiungere la riga

[Pejone]

fatto...

successo niente....

ma se quando do il comando lspci mi dice
lspci
00:00.0 Memory controller: nVidia Corporation CK804 Memory Controller (rev a3)
00:01.0 ISA bridge: nVidia Corporation CK804 ISA Bridge (rev f3)
00:01.1 SMBus: nVidia Corporation CK804 SMBus (rev a2)
00:02.0 USB Controller: nVidia Corporation CK804 USB Controller (rev a2)
00:02.1 USB Controller: nVidia Corporation CK804 USB Controller (rev a3)
00:06.0 IDE interface: nVidia Corporation CK804 IDE (rev f2)
00:07.0 IDE interface: nVidia Corporation CK804 Serial ATA Controller (rev f3)
00:08.0 IDE interface: nVidia Corporation CK804 Serial ATA Controller (rev f3)
00:09.0 PCI bridge: nVidia Corporation CK804 PCI Bridge (rev f2)
00:0a.0 Bridge: nVidia Corporation CK804 Ethernet Controller (rev f3)
00:0b.0 PCI bridge: nVidia Corporation CK804 PCIE Bridge (rev f3)
00:0c.0 PCI bridge: nVidia Corporation CK804 PCIE Bridge (rev f3)
00:0d.0 PCI bridge: nVidia Corporation CK804 PCIE Bridge (rev f3)
00:0e.0 PCI bridge: nVidia Corporation CK804 PCIE Bridge (rev a3)
00:18.0 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] HyperTransport Technology Configuration
00:18.1 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Address Map
00:18.2 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] DRAM Controller
00:18.3 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Miscellaneous Control
01:01.0 FireWire (IEEE 1394): VIA Technologies, Inc. IEEE 1394 Host Controller (rev c0)
05:00.0 VGA compatible controller: ATI Technologies Inc Unknown device 7187
05:00.1 Display controller: ATI Technologies Inc Unknown device 71a7

vuol dire che la scheda è nVidia no??
e se installo quanto proposto in http://www.getautomatix.com/ ??

disperazione.....

[MK66]

[Pejone]

[MK66]

Ho l'impressione che sia ormai la cosa più semplice... mettendola come Live ti riconosce l'audio?

[Pejone]

solo la 6.06
già la 6.10 risulta muta...

[MK66]

Non riesco proprio a capire...
Ho l'impressione che farai prima a piallare e reinstallare la 7.04

[Pejone]

Allora faremo così....
Però volevo segnalarti un'altra cosa:
quando avvio il pc ovviamente parte Grub.
Tenendo in considerazione che io ho 2 hard disk, uno è quello in cui sto cercando di far girare Linux mentre l'altro è dedicato esclusivamente a Xp, il menu di Grub mi probone una cosa del genere:

-Kernel 2.6 .............................
-Kernel 2.6 ------------------ (recovery mode)
-Kernel 2.6 .............................
-Kernel 2.6 ------------------ (recovery mode)
-Kernel 2.6 .............................
-Kernel 2.6 ------------------ (recovery mode)
-memory test

-Windows Xp

Come vedi ripete più volte Linux e ciò penso sia dovuto al fatto che ho prima installato 7.04 poi la 6.4 che ho aggiornato a 6.10 che ho upgradato a 7.04
E' possibile fare un po di pulizia sul menu di grub????

[MK66]

Sostanzialmente, GRUB ti propone più versioni del kernel Linux per il semplice motivo che può capitare che l'ultimo aggiornamento ti faccia casini e allora puoi selezionare (e quindi aprire) la versione precedente, sicuramente stabile...
Poi ci sono i (recovery mode) che ti fanno entrare in modalità testuale...

...e infine sono riportati gli altri sistemi operativi presenti nel computer...

Se noti, infatti, le ultime cifre dei vari kernel devono essere differenti (partendo dalla più recente e finendo alla più vecchia), comunque puoi facilmente visualizzare quanti kernel vuoi nel menù di GRUB, da 1 a infiniti...

Se devi procedere con la reinstallazione di tutto non ti serve, perchè viene reinstallato anche GRUB quindi riparte da zero... comunque, in serata ti linko la pagina della Guida dove parla di come fare per visualizzare solo un certo numero di kernel, per variare il tempo per l'avviamento automatico di Linux e per eventualmente fare in modo che si avvii automaticamente Windows anzichè Linux... (adesso sono al lavoro, con Windows, e non mi ricordo i comandi...)

[dinosaur]

per capire un pò meglio che hardware ha il pc installa hardinfo

[Pejone]

[Pejone]

[GFP]

Hai detto di avere due dischi.. uno per XP, e l'altro per Linux..
Probabilmente da XP puoi controllare che tipo di scheda audio hai installato... (Visto che c'è usiamolo..).
Chissà perchè ho la sensazione che tu abbia due sk audio.. Una integrata sulla motherboard,e la seconda su PCI..
Non so quale tu utilizzi.. ma in Ubuntu, nella barra in alto a SX, c'è l'icona della regolazione del volume.
Facendo un doppio Click ti si dovrebbe aprire le regolazioni del volume..
Verifica innanzitutto che i cursori PCM siano alzati.. e poi anche gli altri..
Poi dal menu FILE scegli la voce "cambia dispositivo" e verifica che ce ne sia uno solo (in questo caso vuol dire che ho sbagliato..). Se ce ne sono due potresti tentare di disabilitare quello scollegato dal BIOS.
E' un tentativo...

[Pejone]

[Pejone]

Nel cd-rom della scheda madre ci sono i driver per Linux (che sono gli stessi che avevo già scaricato).
Quando provo ad installarli mi da errore, riporto il log:
/var/log# cat nvidia-nforce-installer.log
nforce-installer log file '/var/log/nvidia-nforce-installer.log'
creation time: Thu Jul 26 17:58:57 2007

option status:
license pre-accepted : false
expert : false
uninstall : false
driver info : false
no precompiled interface : false
no ncurses color : false
no questions : false
silent : false
Installer install prefix : /usr
kernel source path : (not specified)
net kernel install path : (not specified)
audio kernel install path : (not specified)
proc mount point : /proc
ui : (not specified)
tmpdir : /tmp

Using: nvidia-installer ncurses user interface
-> Found package NVIDIA network driver for Linux-x86
-> Found package NVIDIA audio driver for Linux-x86
-> Please select packages for installation:
Selections:
NVIDIA network driver for Linux-x86 (1.0-13)
NVIDIA audio driver for Linux-x86 (1.0-8)
-> Starting install of NVIDIA network driver for Linux-x86
-> Checking for loaded module nvnet
-> Checking for loaded module forcedeth
-> License accepted.
-> Skipping check for conflicting rpms.
-> /proc/version is Linux version 2.6.20-16-386 (root@terranova) (gcc version
4.1.2 (Ubuntu 4.1.2-0ubuntu4)) #2 Thu Jun 7 20:16:13 UTC 2007
-> No precompiled kernel interface was found to match your kernel; this means
that the installer will need to compile a new kernel interface.
ERROR: Unable to find the kernel source tree for the currently running kernel.
Please make sure you have installed the kernel source files for your
kernel; on Red Hat Linux systems, for example, be sure you have the
'kernel-source' rpm installed. If you know the correct kernel source
files are installed, you may specify the kernel source path with the
'--kernel-source-path' commandline option.
ERROR: Installation of the network driver has failed. Please see the file
'/var/log/nvidia-nforce-installer.log' for details. You may find
suggestions on fixing installation problems in the README available on
the Linux driver download page at www.nvidia.com.
-> Starting install of NVIDIA audio driver for Linux-x86
-> Checking for loaded module nvsound
-> Checking for loaded module nvaudio
-> License accepted.
-> Skipping check for conflicting rpms.
-> /proc/version is Linux version 2.6.20-16-386 (root@terranova) (gcc version
4.1.2 (Ubuntu 4.1.2-0ubuntu4)) #2 Thu Jun 7 20:16:13 UTC 2007
-> No precompiled kernel interface was found to match your kernel; this means
that the installer will need to compile a new kernel interface.
ERROR: Unable to find the kernel source tree for the currently running kernel.
Please make sure you have installed the kernel source files for your
kernel; on Red Hat Linux systems, for example, be sure you have the
'kernel-source' rpm installed. If you know the correct kernel source
files are installed, you may specify the kernel source path with the
'--kernel-source-path' commandline option.
ERROR: Installation of the audio driver has failed. Please see the file
'/var/log/nvidia-nforce-installer.log' for details. You may find
suggestions on fixing installation problems in the README available on
the Linux driver download page at www.nvidia.com.

Devo ricompilare il kernel?? E se si, come??

[dinosaur]

[Pejone]

Questo è il report di hardinfo:
Summary
Computer
Processor AMD Athlon(tm) 64 X2 Dual Core Processor 3800+
Memory 2075MB (257MB used)
Operating System Ubuntu 7.04
User Name root (root)
Date/Time 07/27/07 / 12:52
Display
Resolution 1024x768 pixels
OpenGL Renderer Unknown
X11 Vendor The X.Org Foundation
Multimedia
Audio Adapter USB-Audio - PnP Audio Device
Processor
Processor
Name AMD Opteron/Athlon64/FX
Specification AMD Athlon(tm) 64 X2 Dual Core Processor 3800+
Family, model, stepping 15, 75, 2
Vendor AuthenticAMD
Cache Size 512kb
Frequency 2010,00MHz
BogoMips 4022,00
Byte Order Little Endian
Features
FDIV Bug no
HLT Bug no
F00F Bug no
Coma Bug no
Has FPU yes
Capabilities
fpu Floating Point Unit
vme Virtual 86 Mode Extension
de Debug Extensions - I/O breakpoints
pse Page Size Extensions (4MB pages)
tsc Time Stamp Counter and RDTSC instruction
msr Model Specific Registers
pae Physical Address Extensions (36-bit address, 2MB pages)
mce Machine Check Architeture
cx8 CMPXCHG8 instruction
apic Advanced Programmable Interrupt Controller
sep Fast System Call (SYSENTER/SYSEXIT instructions)
mtrr Memory Type Range Registers
pge Page Global Enable
mca Machine Check Architecture
cmov Conditional Move instruction
pat Page Attribute Table
pse36 36bit Page Size Extensions
clflush Cache Line Flush instruction
mmx MMX technology
fxsr FXSAVE and FXRSTOR instructions
sse SSE instructions
sse2 SSE2 (WNI) instructions
ht HyperThreading
syscall SYSCALL and SYSEXIT instructions
nx No-execute Page Protection
mmxext Extended MMX Technology
Operating System
Version
Kernel Linux 2.6.20-16-386 (i686)
Compiled #2 Thu Jun 7 20:16:13 UTC 2007
C Library GNU C Library version 2.5 (stable)
Distribution Ubuntu 7.04
Current Session
Computer Name pejone-desktop
User Name root (root)
Home Directory /root
Desktop Environment GNOME 92.-1235743249 (session name: Default)
Misc
Uptime 40 minutes
Load Average 0,00, 0,00, 0,00
Languages
Available Languages
en_AU.utf8 English locale for Australia
en_BW.utf8 English locale for Botswana
en_CA.utf8 English locale for Canada
en_DK.utf8 English locale for Denmark
en_GB.utf8 English locale for Britain
en_HK.utf8 English locale for Hong Kong
en_IE.utf8 English locale for Ireland
en_IN English language locale for India
en_NZ.utf8 English locale for New Zealand
en_PH.utf8 English language locale for Philippines
en_SG.utf8 English language locale for Singapore
en_US.utf8 English locale for the USA
en_ZA.utf8 English locale for South Africa
en_ZW.utf8 English locale for Zimbabwe
it_CH.utf8 Italian locale for Switzerland
Sensors
Driver Info
Name k8temp
Cooling Fans
Temperatures
temp1 38,00°C
Voltage Values
Filesystems
Mounted File Systems
/dev/hdb1 35,2 GiB total, 28,8 GiB free
proc 0,0 B total, 0,0 B free
/sys 0,0 B total, 0,0 B free
varrun 1013,3 MiB total, 1013,2 MiB free
varlock 1013,3 MiB total, 1013,3 MiB free
procbususb 1013,3 MiB total, 1013,2 MiB free
udev 1013,3 MiB total, 1013,2 MiB free
devshm 1013,3 MiB total, 1013,3 MiB free
devpts 0,0 B total, 0,0 B free
lrm 1013,3 MiB total, 979,6 MiB free
binfmt_misc 0,0 B total, 0,0 B free
/dev/hda1 76,3 GiB total, 66,2 GiB free
Shared Directories
SAMBA
NFS
Display
Display
Resolution 1024x768 pixels
Vendor The X.Org Foundation
Version 7.2.0
Monitors
Monitor 0 1024x768 pixels
Extensions
BIG-REQUESTS
Composite
DAMAGE
DPMS
Extended-Visual-Information
GLX
MIT-SCREEN-SAVER
MIT-SHM
MIT-SUNDRY-NONSTANDARD
RANDR
RENDER
SECURITY
SGI-GLX
SHAPE
SYNC
TOG-CUP
X-Resource
XAccessControlExtension
XC-APPGROUP
XC-MISC
XFIXES
XFree86-Bigfont
XFree86-DGA
XFree86-Misc
XFree86-VidModeExtension
XInputExtension
XKEYBOARD
XTEST
XVideo
OpenGL
Vendor Unknown
Renderer Unknown
Version Unknown
Network Interfaces
Network Interfaces
lo Sent 0,09MiB, received 0,09MiB
eth0 Sent 0,57MiB, received 8,14MiB
Users
Human Users
pejone Mauro
System Users
root root
daemon daemon
bin bin
sys sys
sync sync
games games
man man
lp lp
mail mail
news news
uucp uucp
proxy proxy
www-data www-data
backup backup
list Mailing List Manager
irc ircd
gnats Gnats Bug-Reporting System (admin)
nobody nobody
dhcp
syslog
klog
cupsys
messagebus
haldaemon Hardware abstraction layer
hplip HPLIP system user
gdm Gnome Display Manager
avahi Avahi mDNS daemon
avahi-autoipd Avahi autoip daemon
Devices
Kernel Modules
Loaded Modules
nls_cp437
isofs
udf Universal Disk Format Filesystem
nls_utf8
ntfs NTFS 1.2/3.x driver - Copyright (c) 2001-2007 Anton Altaparmakov
binfmt_misc
ipv6 IPv6 protocol stack for Linux
rfcomm Bluetooth RFCOMM ver 1.8
l2cap Bluetooth L2CAP ver 2.8
ppdev
cpufreq_userspace CPUfreq policy governor 'userspace'
cpufreq_stats 'cpufreq_stats' - A driver to export cpufreq statsthrough sysfs filesystem
cpufreq_powersave CPUfreq policy governor 'powersave'
cpufreq_ondemand 'cpufreq_ondemand' - A dynamic cpufreq governor for Low Latency Frequency Transition capable processors
freq_table CPUfreq frequency table helpers
cpufreq_conservative 'cpufreq_conservative' - A dynamic cpufreq governor for Low Latency Frequency Transition capable processors optimised for use in a battery environment
tc1100_wmi ACPI WMI Driver
pcc_acpi ACPI HotKey driver for Panasonic Let's Note laptops
dev_acpi Device file access to ACPI namespace
sony_acpi ACPI Sony Notebook Control Driver v0.2
video ACPI Video Driver
sbs Smart Battery System ACPI interface driver
i2c_ec ACPI EC SMBus driver
dock ACPI Dock Station Driver
button ACPI Button Driver
battery ACPI Battery Driver
container ACPI container driver
ac ACPI AC Adapter Driver
asus_acpi Asus Laptop ACPI Extras Driver
backlight Backlight Lowlevel Control Abstraction
sr_mod SCSI cdrom (sr) driver
sbp2 IEEE-1394 SBP-2 protocol driver
lp
snd_usb_audio USB Audio
snd_pcm_oss PCM OSS emulation for ALSA.
snd_mixer_oss Mixer OSS emulation for ALSA.
snd_pcm Midlevel PCM code for ALSA.
snd_page_alloc Memory allocator for ALSA system.
snd_usb_lib USB Audio/MIDI helper module
snd_hwdep Hardware dependent layer
snd_seq_dummy ALSA sequencer MIDI-through client
snd_seq_oss OSS-compatible sequencer module
snd_seq_midi Advanced Linux Sound Architecture sequencer MIDI synth.
snd_rawmidi Midlevel RawMidi code for ALSA.
snd_seq_midi_event MIDI byte <-> sequencer event coder
snd_seq Advanced Linux Sound Architecture sequencer.
snd_timer ALSA timer interface
snd_seq_device ALSA sequencer device management
gspca GSPCA/SPCA5XX USB Camera Driver
videodev Device registrar for Video4Linux drivers v2
v4l2_common misc helper functions for v4l2 device drivers
v4l1_compat v4l(1) compatibility layer for v4l2 drivers.
parport_pc PC-style parallel port driver
parport
rtc
pcspkr PC Speaker beeper driver
hci_usb Bluetooth HCI USB driver ver 2.9
snd Advanced Linux Sound Architecture driver for soundcards.
bluetooth Bluetooth Core ver 2.11
soundcore Core sound module
psmouse PS/2 mouse driver
serio_raw Raw serio driver
k8temp AMD K8 core temperature monitor
i2c_nforce2 nForce2/3/4/5xx SMBus driver
shpchp Standard Hot Plug PCI Controller Driver
pci_hotplug PCI Hot Plug PCI Core
i2c_core I2C-Bus main module
af_packet
tsdev Input driver to touchscreen converter
evdev Input driver event char devices
ext3 Second Extended Filesystem with journaling extensions
jbd
mbcache Meta block cache (for extended attributes)
ide_cd ATAPI CD-ROM Driver
cdrom
ide_disk ATA DISK Driver
sata_nv low-level driver for NVIDIA nForce SATA controller
ata_generic low-level driver for generic ATA
libata Library module for ATA devices
scsi_mod SCSI core
floppy
ehci_hcd 10 Dec 2004 USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ohci1394 Driver for PCI OHCI IEEE-1394 controllers
ieee1394
forcedeth Reverse Engineered nForce ethernet driver
generic PCI driver module for generic PCI IDE
amd74xx AMD PCI IDE driver
ohci_hcd 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
usbcore
raid10
raid456
xor
raid1
raid0
multipath
linear
md_mod
thermal ACPI Thermal Zone Driver
processor ACPI Processor Driver
fan ACPI Fan Driver
dm_mod device-mapper driver
fbcon
tileblit Tile Blitting Operation
font Console Fonts
bitblit Bit Blitting Operation
softcursor Generic software cursor
vesafb
capability Standard Linux Capabilities Security Module
commoncap Standard Linux Common Capabilities Security Module
PCI Devices
PCI Devices
Memory controller nVidia Corporation CK804 Memory Controller
ISA bridge nVidia Corporation CK804 ISA Bridge
SMBus nVidia Corporation CK804 SMBus
USB Controller nVidia Corporation CK804 USB Controller
USB Controller nVidia Corporation CK804 USB Controller
IDE interface nVidia Corporation CK804 IDE
IDE interface nVidia Corporation CK804 Serial ATA Controller
IDE interface nVidia Corporation CK804 Serial ATA Controller
PCI bridge nVidia Corporation CK804 PCI Bridge
Bridge nVidia Corporation CK804 Ethernet Controller
PCI bridge nVidia Corporation CK804 PCIE Bridge
PCI bridge nVidia Corporation CK804 PCIE Bridge
PCI bridge nVidia Corporation CK804 PCIE Bridge
PCI bridge nVidia Corporation CK804 PCIE Bridge
Host bridge Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] HyperTransport Technology Configuration
Host bridge Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Address Map
Host bridge Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] DRAM Controller
Host bridge Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Miscellaneous Control
FireWire (IEEE 1394) VIA Technologies, Inc. IEEE 1394 Host Controller
VGA compatible controller ATI Technologies Inc Unknown device 7187
Display controller ATI Technologies Inc Unknown device 71a7
USB Devices
Printers
Printers
Input Devices
Input Devices
Macintosh mouse button emulation
AT Translated Set 2 keyboard
PC Speaker
ImExPS/2 Generic Explorer Mouse
Power Button (FF)
Power Button (CM)
Storage
IDE Disks
Maxtor 6Y080L0
ST340810A
HL-DT-ST DVDRAM GSA-4120B
JLMS DVD-ROM LTD-166S
SCSI Disks

mentre con sudo apt-get install linux-headers-`uname -r` build-essential
sudo apt-get install linux-headers-`uname -r` build-essential
Lettura della lista dei pacchetti in corso... Fatto
Generazione dell'albero delle dipendenze in corso
Lettura delle informazioni di stato in corso... Fatto
I seguenti pacchetti verranno inoltre installati:
dpkg-dev g++ g++-4.1 libc6-dev libstdc++6-4.1-dev linux-libc-dev
Pacchetti suggeriti:
debian-keyring gcc-4.1-doc lib64stdc++6 glibc-doc manpages-dev
libstdc++6-4.1-doc
I seguenti pacchetti NUOVI (NEW) saranno installati:
build-essential dpkg-dev g++ g++-4.1 libc6-dev libstdc++6-4.1-dev
linux-headers-2.6.20-16-386 linux-libc-dev
0 aggiornati, 8 installati, 0 da rimuovere e 0 non aggiornati.
È necessario prendere 1503kB/8889kB di archivi.
Dopo l'estrazione, verranno occupati 40,9MB di spazio su disco.
Continuare [S/n]? s
Cambio disco: Inserire il disco chiamato
'Ubuntu 7.04 _Feisty Fawn_ - Release i386 (20070415)'
nel dispositivo '/cdrom/' e premere invio

Get:1 http://security.ubuntu.com feisty-security/main linux-libc-dev 2.6.20-16.29 [667kB]
Get:2 http://security.ubuntu.com feisty-security/main linux-headers-2.6.20-16-386 2.6.20-16.29 [836kB]
Scaricato 1503kB in 37s (40,0kB/s)
Selezionato il pacchetto linux-libc-dev, che non lo era.
(Lettura del database ... 104490 file e directory attualmente installati.)
Spacchetto linux-libc-dev (da .../linux-libc-dev_2.6.20-16.29_i386.deb) ...
Selezionato il pacchetto libc6-dev, che non lo era.
Spacchetto libc6-dev (da .../libc6-dev_2.5-0ubuntu14_i386.deb) ...
Selezionato il pacchetto libstdc++6-4.1-dev, che non lo era.
Spacchetto libstdc++6-4.1-dev (da .../libstdc++6-4.1-dev_4.1.2-0ubuntu4_i386.deb) ...
Selezionato il pacchetto g++-4.1, che non lo era.
Spacchetto g++-4.1 (da .../g++-4.1_4.1.2-0ubuntu4_i386.deb) ...
Selezionato il pacchetto g++, che non lo era.
Spacchetto g++ (da .../g++_4.1.2-1ubuntu1_i386.deb) ...
Selezionato il pacchetto dpkg-dev, che non lo era.
Spacchetto dpkg-dev (da .../dpkg-dev_1.13.24ubuntu6_all.deb) ...
Selezionato il pacchetto build-essential, che non lo era.
Spacchetto build-essential (da .../build-essential_11.3_i386.deb) ...
Selezionato il pacchetto linux-headers-2.6.20-16-386, che non lo era.
Spacchetto linux-headers-2.6.20-16-386 (da .../linux-headers-2.6.20-16-386_2.6.20-16.29_i386.deb) ...
Configuro linux-libc-dev (2.6.20-16.29) ...
Configuro libc6-dev (2.5-0ubuntu14) ...
Configuro dpkg-dev (1.13.24ubuntu6) ...
Configuro linux-headers-2.6.20-16-386 (2.6.20-16.29) ...
Configuro libstdc++6-4.1-dev (4.1.2-0ubuntu4) ...
Configuro g++-4.1 (4.1.2-0ubuntu4) ...
Configuro g++ (4.1.2-1ubuntu1) ...

Configuro build-essential (11.3) ...

E ora??

[dinosaur]

adesso prendi il cd con i driver e prova a reinstallare, vediamo che succede

[Pejone]

Succede che stavolta da questo errore visibile sul log di installazione:
cat nvidia-nforce-installer.log
nforce-installer log file '/var/log/nvidia-nforce-installer.log'
creation time: Fri Jul 27 15:36:50 2007

option status:
license pre-accepted : false
expert : false
uninstall : false
driver info : false
no precompiled interface : false
no ncurses color : false
no questions : false
silent : false
Installer install prefix : /usr
kernel source path : (not specified)
net kernel install path : (not specified)
audio kernel install path : (not specified)
proc mount point : /proc
ui : (not specified)
tmpdir : /tmp

Using: nvidia-installer ncurses user interface
-> Found package NVIDIA network driver for Linux-x86
-> Found package NVIDIA audio driver for Linux-x86
-> Please select packages for installation:
Selections:
NVIDIA audio driver for Linux-x86 (1.0-8)
-> Starting install of NVIDIA audio driver for Linux-x86
-> Checking for loaded module nvsound
-> Checking for loaded module nvaudio
-> License accepted.
-> Skipping check for conflicting rpms.
-> /proc/version is Linux version 2.6.20-16-386 (root@terranova) (gcc version
4.1.2 (Ubuntu 4.1.2-0ubuntu4)) #2 Thu Jun 7 20:16:13 UTC 2007
-> No precompiled kernel interface was found to match your kernel; this means
that the installer will need to compile a new kernel interface.
-> Kernel source path: '/lib/modules/2.6.20-16-386/build'
-> Kernel output path: '/lib/modules/2.6.20-16-386/build'
-> Performing cc_version_check with CC="cc".
-> running command /bin/grep "^PATCHLEVEL ="
/lib/modules/2.6.20-16-386/build/Makefile | /usr/bin/cut -d " " -f 3
-> Kernel module filename is nvsound.ko
Cleaning kernel module build directory.
executing: 'cd ./nvsound/main; make clean'...
rm -f *.ko *mod.* *.cmd nv*.o *~ core
-> Building kernel module:
executing: 'cd ./nvsound/main; make module SYSSRC=/lib/modules/2.6.20-16-386
/build SYSOUT=/lib/modules/2.6.20-16-386/build'...
make -C /lib/modules/2.6.20-16-386/build \
KBUILD_SRC=/usr/src/linux-headers-2.6.20-16-386 \
KBUILD_EXTMOD="/tmp/selfgz13880/NFORCE-Linux-x86-1.0-0311-pkg1/nvsound/main
" -f /usr/src/linux-headers-2.6.20-16-386/Makefile modules
test -e include/linux/autoconf.h -a -e include/config/auto.conf || ( \
echo; \
echo " ERROR: Kernel configuration is invalid."; \
echo " include/linux/autoconf.h or include/config/auto.conf are mis
sing."; \
echo " Run 'make oldconfig && make prepare' on kernel src to fix it
."; \
echo; \
/bin/false)
mkdir -p /tmp/selfgz13880/NFORCE-Linux-x86-1.0-0311-pkg1/nvsound/main/.tmp_v
ersions
rm -f /tmp/selfgz13880/NFORCE-Linux-x86-1.0-0311-pkg1/nvsound/main/.tmp_vers
ions/*
make -f /usr/src/linux-headers-2.6.20-16-386/scripts/Makefile.build obj=/tmp
/selfgz13880/NFORCE-Linux-x86-1.0-0311-pkg1/nvsound/main
cc -Wp,-MD,/tmp/selfgz13880/NFORCE-Linux-x86-1.0-0311-pkg1/nvsound/main/.n
valinux.o.d -nostdinc -isystem /usr/lib/gcc/i486-linux-gnu/4.1.2/include -D
__KERNEL__ -Iinclude -Iinclude2 -I/usr/src/linux-headers-2.6.20-16-386/inclu
de -include include/linux/autoconf.h -Iubuntu/include -I/usr/src/linux-heade
rs-2.6.20-16-386/ubuntu/include -I/tmp/selfgz13880/NFORCE-Linux-x86-1.0-031
1-pkg1/nvsound/main -Wall -Wundef -Wstrict-prototypes -Wno-trigraphs -fno-st
rict-aliasing -fno-common -O2 -pipe -msoft-float -mregparm=3 -mpreferred-sta
ck-boundary=2 -march=i486 -mtune=generic -ffreestanding -maccumulate-outgoin
g-args -I/usr/src/linux-headers-2.6.20-16-386/include/asm-i386/mach-default
-Iinclude/asm-i386/mach-default -fomit-frame-pointer -g -fno-stack-protector
-Wdeclaration-after-statement -Wno-pointer-sign -I/tmp/selfgz13880/NFORCE-L
inux-x86-1.0-0311-pkg1/nvsound/main -Wall -Wimplicit -Wreturn-type -Wswitch
-Wformat -Wchar-subscripts -Wparentheses -Wpointer-arith -Wno-multichar -Wer
ror -O -MD -Wno-cast-qual -Wno-error -DNV_CHANGE_PAGE_ATTR_PRESENT -DMODULE
-D"KBUILD_STR(s)=#s" -D"KBUILD_BASENAME=KBUILD_STR(nvalinux)" -D"KBUILD_MOD
NAME=KBUILD_STR(nvsound)" -c -o /tmp/s
elfgz13880/NFORCE-Linux-x86-1.0-0311-pkg1/nvsound/main/.tmp_nvalinux.o /tmp/
selfgz13880/NFORCE-Linux-x86-1.0-0311-pkg1/nvsound/main/nvalinux.c
In file included from include/linux/list.h:8,
from include/linux/module.h:10,
from /tmp/selfgz13880/NFORCE-Linux-x86-1.0-0311-pkg1/nvsoun
d/main/nvalinux.c:19:
include/linux/prefetch.h: In function ?prefetch_range?:
include/linux/prefetch.h:62: warning: pointer of type ?void *? used in a
rithmetic
cc -Wp,-MD,/tmp/selfgz13880/NFORCE-Linux-x86-1.0-0311-pkg1/nvsound/main/.n
vmixer.o.d -nostdinc -isystem /usr/lib/gcc/i486-linux-gnu/4.1.2/include -D_
_KERNEL__ -Iinclude -Iinclude2 -I/usr/src/linux-headers-2.6.20-16-386/includ
e -include include/linux/autoconf.h -Iubuntu/include -I/usr/src/linux-header
s-2.6.20-16-386/ubuntu/include -I/tmp/selfgz13880/NFORCE-Linux-x86-1.0-0311
-pkg1/nvsound/main -Wall -Wundef -Wstrict-prototypes -Wno-trigraphs -fno-str
ict-aliasing -fno-common -O2 -pipe -msoft-float -mregparm=3 -mpreferred-stac
k-boundary
=2 -march=i486 -mtune=generic -ffreestanding -maccumulate-outgoing-args -I/u
sr/src/linux-headers-2.6.20-16-386/include/asm-i386/mach-default -Iinclude/a
sm-i386/mach-default -fomit-frame-pointer -g -fno-stack-protector -Wdeclarat
ion-after-statement -Wno-pointer-sign -I/tmp/selfgz13880/NFORCE-Linux-x86-1
.0-0311-pkg1/nvsound/main -Wall -Wimplicit -Wreturn-type -Wswitch -Wformat -
Wchar-subscripts -Wparentheses -Wpointer-arith -Wno-multichar -Werror -O -MD
-Wno-cast-qual -Wno-error -DNV_CHANGE_PAGE_ATTR_PRESENT -DMODULE -D"KBUILD_S
TR(s)=#s" -D"KBUILD_BASENAME=KBUILD_STR(nvmixer)" -D"KBUILD_MODNAME=KBUILD_
STR(nvsound)" -c -o /tmp/selfgz13880/NFORCE-Linux-x86-1.0-0311-pkg1/nvsound/
main/.tmp_nvmixer.o /tmp/selfgz13880/NFORCE-Linux-x86-1.0-0311-pkg1/nvsound/
main/nvmixer.c
In file included from include/linux/list.h:8,
from include/linux/wait.h:22,
from include/asm/semaphore.h:41,
from include/linux/sched.h:59,
from /tmp/selfgz13880/NFORCE-Linux-x86-1.0-0311-pkg1/nvsoun
d/main/nvhw.h:29,
from /tmp/selfgz13880/NFORCE-Linux-x86-1.0-0311-pkg1/nvsoun
d/main/nvmixer.c:14:
include/linux/prefetch.h: In function ?prefetch_range?:
include/linux/prefetch.h:62: warning: pointer of type ?void *? used in a
rithmetic
cc -Wp,-MD,/tmp/selfgz13880/NFORCE-Linux-x86-1.0-0311-pkg1/nvsound/main/.n
vmain.o.d -nostdinc -isystem /usr/lib/gcc/i486-linux-gnu/4.1.2/include -D__
KERNEL__ -Iinclude -Iinclude2 -I/usr/src/linux-headers-2.6.20-16-386/include
-include include/linux/autoconf.h -Iubuntu/include -I/usr/src/linux-headers-
2.6.20-16-386/ubuntu/include -I/tmp/selfgz13880/NFORCE-Linux-x86-1.0-0311-p
kg1/nvsound/main -Wall -Wundef -Wstrict-prototypes -Wno-trigraphs -fno-stric
t-aliasing -fno-common -O2 -pipe -msoft-float -mregparm=3 -mpreferred-stack-
boundary=2 -march=i486 -mtune=generic -ffreestanding -maccumulate-outgoing-a
rgs -I/usr/src/linux-headers-2.6.20-16-386/include/asm-i386/mach-default -Ii
nclude/asm-i386/mach-default -fomit-frame-pointer -g -fno-s
tack-protector -Wdeclaration-after-statement -Wno-pointer-sign -I/tmp/selfg
z13880/NFORCE-Linux-x86-1.0-0311-pkg1/nvsound/main -Wall -Wimplicit -Wreturn
-type -Wswitch -Wformat -Wchar-subscripts -Wparentheses -Wpointer-arith -Wno
-multichar -Werror -O -MD -Wno-cast-qual -Wno-error -DNV_CHANGE_PAGE_ATTR_PR
ESENT -DMODULE -D"KBUILD_STR(s)=#s" -D"KBUILD_BASENAME=KBUILD_STR(nvmain)"
-D"KBUILD_MODNAME=KBUILD_STR(nvsound)" -c -o /tmp/selfgz13880/NFORCE-Linux-x
86-1.0-0311-pkg1/nvsound/main/.tmp_nvmain.o /tmp/selfgz13880/NFORCE-Linux-x8
6-1.0-0311-pkg1/nvsound/main/nvmain.c
In file included from include/linux/list.h:8,
from include/linux/module.h:10,
from /tmp/selfgz13880/NFORCE-Linux-x86-1.0-0311-pkg1/nvsoun
d/main/nvmain.c:27:
include/linux/prefetch.h: In function ?prefetch_range?:
include/linux/prefetch.h:62: warning: pointer of type ?void *? used in a
rithmetic
/tmp/selfgz13880/NFORCE-Linux-x86-1.0-0311-pkg1/nvsound/main/nvmain.c: In fu
nction ?Nvaudio_mmap?:
/tmp/selfgz13880/NFORCE-Linux-x86-1.0-0311-pkg1/nvsound/main/nvmain.c:991: w
arning: implicit declaration of function ?remap_page_range?
/tmp/selfgz13880/NFORCE-Linux-x86-1.0-0311-pkg1/nvsound/main/nvmain.c: In fu
nction ?Nvaudio_probe?:
/tmp/selfgz13880/NFORCE-Linux-x86-1.0-0311-pkg1/nvsound/main/nvmain.c:2091:
warning: passing argument 2 of ?request_irq? from incompatible pointer t
ype
/tmp/selfgz13880/NFORCE-Linux-x86-1.0-0311-pkg1/nvsound/main/nvmain.c:2179:
warning: passing argument 2 of ?request_irq? from incompatible pointer t
ype
/tmp/selfgz13880/NFORCE-Linux-x86-1.0-0311-pkg1/nvsound/main/nvmain.c: At to
p level:
/tmp/selfgz13880/NFORCE-Linux-x86-1.0-0311-pkg1/nvsound/main/nvmain.c:2205:
error: expected ?)? before string constant
make[4]: *** [/tmp/selfgz13880/NFORCE-Linux-x86-1.0-0311-pkg1/nvsound/main/n
vmain.o] Error 1
make[3]: *** [_module_/tmp/selfgz13880/NFORCE-Linux-x86-1.0-0311-pkg1/nvsoun
d/main] Error 2
make[2]: *** [modules] Error 2
-> Error.
ERROR: The NVIDIA kernel module was not created.
ERROR: Installation of the audio driver has failed. Please see the file
'/var/log/nvidia-nforce-installer.log' for details. You may find
suggestions on fixing installation problems in the README available on
the Linux driver download page at www.nvidia.com.

[Pejone]

Ho FINALMENTE risolto!!!!!!

Alla fine bastava fare quando suggerito da questa breve guida:
http://ferraro.wordpress.com/2007/01/27/configurare-la-scheda-audio-predifinita-per-chi-ne-possiede-molteplici-asound/


GRAZIE comunque a tutti quelli che mi hanno seguito in questo mio primo problema con Ubuntu