Olimpo Informatico

[jasmine]

ciao a tutti,
tutte le volte che masterizzo filo iso con nero burning con esito positivo ma quando metto il cd o dvd per aprirli mi si visualizza una finestra impossibile accedee a I:\. funzione non coretta.
non riesco a capire il perche invece per masterizzare al cose non ci sono problemi
qualcuno mi puo aiutare grazie.
questo il log

=== Scsi-Device-Map ===
CdRomPeripheral : HP DVD Writer 400c atapi Port 0 ID 0 DMA: On
DiskPeripheral : SAMSUNG HD501LJ atapi Port 1 ID 1 DMA: On
CdRomPeripheral : NERO IMAGEDRIVE2 2.26 imagedrv Port 3 ID 1 DMA: Off

=== CDRom-Device-Map ===
HP DVD Writer 400c I: CdRom0
NERO IMAGEDRIVE2 D: CdRom1
=======================

AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 83886080 (0) Byte
BUFE : 0
Physical memory : 2047MB (2096364kB)
Free physical memory: 1245MB (1275660kB)
Memory in use : 39 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)

15.3.2010
CD Image
14.27.13 #1 Text 0 File SCSIPTICommands.cpp, Line 450
LockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL

14.27.13 #2 Text 0 File Burncd.cpp, Line 3186
HP DVD Writer 400c
Seamless Link activated

14.27.13 #3 Text 0 File Burncd.cpp, Line 3500
Turn on Disc-At-Once, using CD-R/RW media

14.27.13 #4 Text 0 File DlgWaitCD.cpp, Line 307
Last possible write address on media: 359848 ( 79:59.73)
Last address to be written: 328479 ( 73:01.54)

14.27.13 #5 Text 0 File DlgWaitCD.cpp, Line 319
Write in overburning mode: NO (enabled: CD)

14.27.13 #6 Text 0 File DlgWaitCD.cpp, Line 2988
Recorder: HP DVD Writer 400c;
CDRW code: 00 97 27 00; OSJ entry from: DIGITAL STORAGE TECHNOLOGY CO.,LTD
ATIP Data:
Special Info [hex] 1: D1 00 C6, 2: 61 1B 00 (LI 97:27.00), 3: 4F 3B 4A (LO 79:59.74)
Additional Info [hex] 1: 02 4C B0, 2: 5A C8 06, 3: 00 00 00 (invalid)

14.27.13 #7 Text 0 File DlgWaitCD.cpp, Line 493
>>> Protocol of DlgWaitCD activities: <<<
=========================================

14.27.13 #8 Text 0 File ThreadedTransferInterface.cpp, Line 778
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 (2 - CD-ROM Mode 1, Joliet)
2 indices, index0 (150) not provided
original disc pos #0 + 328480 (328480) = #328480/72:59.55
not relocatable, disc pos for caching/writing not required/not required
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 328480 blocks [I: HP DVD Writer 400c]
--------------------------------------------------------------

14.27.13 #9 Text 0 File ThreadedTransferInterface.cpp, Line 979
Prepare [I: HP DVD Writer 400c] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1: Idx 0 Idx 1 Next Trk
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 307200 673034240, ISRC ""
DAO layout:
===========
___Start_|____Track_|_Idx_|_CtrlAdr_|_____Size_|______NWA_|_RecDep__________
-150 | lead-in | 0 | 0x41 | 0 | 0 | 0x00
-150 | 1 | 0 | 0x41 | 0 | 0 | 0x00
0 | 1 | 1 | 0x41 | 328480 | 328480 | 0x00
328480 | lead-out | 1 | 0x41 | 0 | 0 | 0x00

14.27.13 #10 Text 0 File SCSIPTICommands.cpp, Line 240
SPTILockVolume - completed successfully for FSCTL_LOCK_VOLUME

14.27.13 #11 Text 0 File Burncd.cpp, Line 4286
Caching options: cache CDRom or Network-Yes, small files-No (<64KB)

14.27.13 #12 Phase 24 File dlgbrnst.cpp, Line 1767
Caching of files started

14.27.13 #13 Text 0 File Burncd.cpp, Line 4405
Cache writing successful.

14.27.13 #14 Phase 25 File dlgbrnst.cpp, Line 1767
Caching of files completed

14.27.13 #15 Phase 36 File dlgbrnst.cpp, Line 1767
Burn process started at 4x (600 KB/s)

14.27.13 #16 Text 0 File ThreadedTransferInterface.cpp, Line 2726
Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0

14.27.13 #17 Text 0 File MMC.cpp, Line 17806
StartDAO : CD-Text - Off

14.27.13 #18 Text 0 File MMC.cpp, Line 22488
Set BUFE: Seamless Link -> ON

14.27.13 #19 Text 0 File MMC.cpp, Line 18034
CueData, Len=32
41 00 00 14 00 00 00 00
41 01 00 10 00 00 00 00
41 01 01 10 00 00 02 00
41 aa 01 14 00 49 01 37

14.27.13 #20 Text 0 File ThreadedTransfer.cpp, Line 268
Pipe memory size 83836800

14.27.40 #21 SPTI -1135 File SCSIPassThrough.cpp, Line 181
CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1135)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x0C
Sense Qual: 0x00
CDB Data: 0x2A 00 00 00 02 80 00 00 20 00 00 00
Sense Area: 0x70 00 03 00 00 00 00 12 00 00 00 00 0C
Buffer x08430540: Len x10000
0x22 00 80 02 00 00 00 00 02 80 00 08 00 00 00 00
0x08 00 00 00 00 00 00 00 00 02 00 00 01 00 00 01
0x01 00 22 00 75 02 00 00 00 00 02 75 00 08 00 00

14.27.40 #22 CDR -1135 File Writer.cpp, Line 306
Write error
I: HP DVD Writer 400c

14.27.40 #23 Phase 38 File dlgbrnst.cpp, Line 1767
Burn process failed at 4x (600 KB/s)

14.27.40 #24 Text 0 File SCSIPTICommands.cpp, Line 287
SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME

14.27.42 #25 Text 0 File Cdrdrv.cpp, Line 11411
DriveLocker: UnLockVolume completed

14.27.42 #26 Text 0 File SCSIPTICommands.cpp, Line 450
UnLockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL


Existing drivers:

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

[Taurex]

il file iso di che dimensione è?

[jasmine]

grazie di avermi risposto
le dimenzione sono variabile alcuni 688 MB e 709 mb per il cd e 4.558 per il dvd NB:IL CD E DVD che uso son cd-r DVD-R grazie

[Taurex]

hai provato per caso con un altro software?