Precedente :: Successivo |
Autore |
Messaggio |
splarz Moderatore Hardware e Networking
Registrato: 20/08/06 14:54 Messaggi: 2767
|
Inviato: 15 Ott 2011 15:06 Oggetto: Pc morente: scheda madre o alimentatore? Chi offre di più? |
|
|
La situazione di questo Pc è tragica: pulito dai virus e formattato si pianta ancora, quindi credo sia un problema hardware. Siccome sono testardo ho deciso che 'sto coso funzionerà, quindi mi accingo a sostituire pezzi. Ora, "si pianta" significa che: - mentre lo si usa si blocca e si riavvia da solo
- fa fatica ad accendersi: girano le ventole ma il bios non bippa
- si pianta in accensione
- si pianta se ad un hub usb collego mouse, penna per la navigazione wi-fi, penna usb normale
Voi direte
a-ah, c'hai un hub farlocco che ti blocca tutto
soprattutto se il debug del minidump (uno solo, tra l'altro) è questo: Codice: | Microsoft (R) Windows Debugger Version 6.12.0002.633 X86
Copyright (c) Microsoft Corporation. All rights reserved.
Loading Dump File [C:\WINDOWS\Minidump\Mini101511-01.dmp]
Mini Kernel Dump File: Only registers and stack trace are available
Symbol search path is: C:\WINDOWS\Symbols
Executable search path is:
Unable to load image ntoskrnl.exe, Win32 error 0n2
*** WARNING: Unable to verify timestamp for ntoskrnl.exe
Windows XP Kernel Version 2600 (Service Pack 3) MP (2 procs) Free x86 compatible
Product: WinNt, suite: TerminalServer SingleUserTS
Machine Name:
Kernel base = 0x804d7000 PsLoadedModuleList = 0x8055d720
Debug session time: Sat Oct 15 11:03:17.140 2011 (UTC + 2:00)
System Uptime: 0 days 0:13:54.838
Unable to load image ntoskrnl.exe, Win32 error 0n2
*** WARNING: Unable to verify timestamp for ntoskrnl.exe
Loading Kernel Symbols
...............................................................
................................................................
....
Loading User Symbols
Loading unloaded module list
...........................
Unable to load image usbhub.sys, Win32 error 0n2
*** WARNING: Unable to verify timestamp for usbhub.sys
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************
Use !analyze -v to get detailed debugging information.
BugCheck 1000007E, {c0000005, 0, ba4ffac0, ba4ff7bc}
Unable to load image USBSTOR.SYS, Win32 error 0n2
*** WARNING: Unable to verify timestamp for USBSTOR.SYS
Probably caused by : USBSTOR.SYS ( USBSTOR!USBSTOR_Pnp+4e )
Followup: MachineOwner
---------
0: kd> !analyze -v
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************
SYSTEM_THREAD_EXCEPTION_NOT_HANDLED_M (1000007e)
This is a very common bugcheck. Usually the exception address pinpoints
the driver/function that caused the problem. Always note this address
as well as the link date of the driver/image that contains this address.
Some common problems are exception code 0x80000003. This means a hard
coded breakpoint or assertion was hit, but this system was booted
/NODEBUG. This is not supposed to happen as developers should never have
hardcoded breakpoints in retail code, but ...
If this happens, make sure a debugger gets connected, and the
system is booted /DEBUG. This will let us see why this breakpoint is
happening.
Arguments:
Arg1: c0000005, The exception code that was not handled
Arg2: 00000000, The address that the exception occurred at
Arg3: ba4ffac0, Exception Record Address
Arg4: ba4ff7bc, Context Record Address
Debugging Details:
------------------
EXCEPTION_CODE: (NTSTATUS) 0xc0000005 - L'istruzione a "0x%08lx" ha fatto riferimento alla memoria a "0x%08lx". La memoria non poteva essere "%s".
FAULTING_IP:
+1c
00000000 ?? ???
EXCEPTION_RECORD: ba4ffac0 -- (.exr 0xffffffffba4ffac0)
ExceptionAddress: 00000000
ExceptionCode: c0000005 (Access violation)
ExceptionFlags: 00000000
NumberParameters: 2
Parameter[0]: 00000008
Parameter[1]: 00000000
Attempt to execute non-executable address 00000000
CONTEXT: ba4ff7bc -- (.cxr 0xffffffffba4ff7bc)
eax=00000003 ebx=89091cd0 ecx=00000000 edx=00000000 esi=8994c368 edi=89091a60
eip=00000000 esp=ba4ffb88 ebp=ba4ffbbc iopl=0 nv up ei pl zr na pe nc
cs=0008 ss=0010 ds=0023 es=0023 fs=0030 gs=0000 efl=00210246
00000000 ?? ???
Resetting default scope
CUSTOMER_CRASH_COUNT: 1
DEFAULT_BUCKET_ID: DRIVER_FAULT
PROCESS_NAME: System
ERROR_CODE: (NTSTATUS) 0xc0000005 - L'istruzione a "0x%08lx" ha fatto riferimento alla memoria a "0x%08lx". La memoria non poteva essere "%s".
EXCEPTION_PARAMETER1: 00000008
EXCEPTION_PARAMETER2: 00000000
WRITE_ADDRESS: 00000000
FOLLOWUP_IP:
USBSTOR!USBSTOR_Pnp+4e
ba444980 ?? ???
FAILED_INSTRUCTION_ADDRESS:
+2922faf018adfc0
00000000 ?? ???
BUGCHECK_STR: 0x7E
LAST_CONTROL_TRANSFER: from ba31cc8d to 00000000
STACK_TEXT:
WARNING: Frame IP not in any known module. Following frames may be wrong.
ba4ffb84 ba31cc8d 00000000 68627375 70646f52 0x0
ba4ffbbc ba323e8a 8994c300 89c30630 89c30630 usbhub!USBH_PdoRemoveDevice+0x7b
ba4ffbd8 ba31cf06 8994c368 89c30630 00000002 usbhub!USBH_PdoPnP+0x58
ba4ffbfc ba31a5e4 0194c368 89c30630 ba4ffc30 usbhub!USBH_PdoDispatch+0x5a
ba4ffc0c 804ef19f 8994c2b0 89c30630 88b596f0 usbhub!USBH_HubDispatch+0x48
ba4ffc30 ba444980 88b59638 89c30630 89c30730 nt!MiFlushSectionInternal+0x256
ba4ffc48 804ef19f 88b59638 89c30630 ba4ffcd4 USBSTOR!USBSTOR_Pnp+0x4e
ba4ffc84 80592deb 88b59638 ba4ffcb0 00000000 nt!MiFlushSectionInternal+0x256
ba4ffcd8 804f6f70 8994c2b0 00000002 00000000 nt!NtDeleteValueKey+0xab
ba4ffd00 805947bc e3521ad0 00000018 e18518e8 nt!FsRtlAddLargeMcbEntry+0x43e
ba4ffd18 80594823 88bedd30 00000002 e18518e8 nt!CmpCheckCreateAccess+0x40
ba4ffd4c 805948c7 8994c2b0 028518e8 00000002 nt!CmpDoCreate+0x53
ba4ffd7c 805387cb 8996b958 00000000 89d5e640 nt!CmpDoCreate+0x180
ba4ffdac 805cffa8 8996b958 00000000 00000000 nt!MiFindActualFaultingPte+0x96
ba4ffddc 8054615e 805386dc 00000001 00000000 nt!IopQueryReconfiguration+0x76
ba4ffdf8 00000000 00000000 00000000 00001f80 nt!ExpFindAndRemoveTagBigPages+0x1c
SYMBOL_STACK_INDEX: 6
SYMBOL_NAME: USBSTOR!USBSTOR_Pnp+4e
FOLLOWUP_NAME: MachineOwner
MODULE_NAME: USBSTOR
IMAGE_NAME: USBSTOR.SYS |
e invece no, si pianta anche senza hub.
l'hard disk è sano, la ram ha fatto 14 ore di memtest senza dare errori.
non resta molto: o l'alimentatore o la scheda madre.
io voto scheda madre, anche se in realtà... voi che dite?
dimenticavo le specifiche: - mobo M2A-VM HDMI
- cpu AMD Athlon x2 5000+
- 2x1GB DDR2 800 MHz
- HD Maxtor
- alimentatore boh da 600 e rotti Watt
|
|
Top |
|
|
maxismakingwax Amministratore
Registrato: 23/07/06 20:22 Messaggi: 7446 Residenza: Con la testa nel case
|
Inviato: 15 Ott 2011 16:24 Oggetto: |
|
|
Sembrano chiari problemi di tensione, ergo o alimentatore o scheda madre.
Visto che tu hai preso la scheda io scelgo alimentatore. Certo è che con un alimentatore dubbio rischi comunque di rovinare la scheda.
L'unico modo per provare se è davvero l'alimentatore (e basta) è sostituirlo. Sulla scheda visti anche i riavvii controllerei i condensatori |
|
Top |
|
|
splarz Moderatore Hardware e Networking
Registrato: 20/08/06 14:54 Messaggi: 2767
|
Inviato: 16 Ott 2011 09:41 Oggetto: |
|
|
Citazione: | Visto che tu hai preso la scheda io scelgo alimentatore. Certo è che con un alimentatore dubbio rischi comunque di rovinare la scheda. | infatti mi sa che proverò prima un alimentatore, poi eventualmente la mobo - è anche un casino trovarla a breve, è am2+...
Citazione: | Sulla scheda visti anche i riavvii controllerei i condensatori | giusto!
intanto grazie
quel che mi fa molto strano è che posso provocare i blocchi inserendo nell'hub tre periferiche, non capisco se è una roba di hub, alimentazione o mobo. |
|
Top |
|
|
splarz Moderatore Hardware e Networking
Registrato: 20/08/06 14:54 Messaggi: 2767
|
Inviato: 25 Ott 2011 16:24 Oggetto: |
|
|
cambiato l'alimentatore, non è lui. l'hub era comunque rotto, i problemi son rimasti, ecco i nuovi minidump:
1
2
3
4
l'ultima volta si è piantato staccando la spina di un frigo attaccato alla stessa multipla.
ho anche aggiornato il bios... però mi sembra strano che il pc funzioni per anni e poi cominci a schizzare. |
|
Top |
|
|
maxismakingwax Amministratore
Registrato: 23/07/06 20:22 Messaggi: 7446 Residenza: Con la testa nel case
|
Inviato: 27 Ott 2011 09:54 Oggetto: |
|
|
Prova a collegarlo ad un Ups e vediamo se con una corrente stabilizzata migliora (ovviamente se ti è possibile) |
|
Top |
|
|
|
|
Non puoi inserire nuovi argomenti Non puoi rispondere a nessun argomento Non puoi modificare i tuoi messaggi Non puoi cancellare i tuoi messaggi Non puoi votare nei sondaggi
|
|