Precedente :: Successivo |
Autore |
Messaggio |
moreno Mortale pio
Registrato: 03/07/07 08:50 Messaggi: 26
|
Inviato: 30 Gen 2012 23:58 Oggetto: Chi mi aiuta a configurare un cisco 877 per internet e lan? |
|
|
Buona serata a tutti!!!
Mi hanno regalato un cisco 877 che vorrei utilizzare per fare esperienza sul cisco ios e sostituire il mio router ADSL e switch.
Ho scaricato moltissime configurazioni da internet ma alla fine ho sempre finito con un bel write erase
Io vorrei semplicemente,per ora,accedere a internet tramite ADSL di TELETU a 7Mb (a casa mia e` variabile da 3 a 7 Mb visto che abbiamo un DSLAM auto adattivo),con login e password
E poter utilizzare le 4 fast ethernet come normali porte di switch con DHCP.
Qualcuno mi puo` postare una cosa semplice,commentata e funzionante cosi` che possa pure imparare qualcosa?
Diciamo proprio a scimmietta level.
cavo terminale,accesso al roter gia` funzionante,manuale cisco a portata di mano.
Attendo fiducioso....
Mo |
|
Top |
|
|
uvula Mortale adepto
Registrato: 26/09/11 08:39 Messaggi: 31
|
Inviato: 31 Gen 2012 17:47 Oggetto: |
|
|
Ciao,
l'adsl di teletu ha indirizzi pubblici dinamici o fissi?
hai da mettere un'autenticazione per collegarti?
che ios monta?
fai uno show version e incollala per cortesia.
così possiamo vedere cosa fare.
attendo, ciao. |
|
Top |
|
|
moreno Mortale pio
Registrato: 03/07/07 08:50 Messaggi: 26
|
Inviato: 31 Gen 2012 23:07 Oggetto: |
|
|
Grazie della risposta!!!
Eccoti le info che mi hai richiesto
Indirizzo IP dinamico
Accesso tramite login/password
Configurazione Router
Protocollo supportato PPPoE (se non supportato: PPPoA)
VPI 8
VCI 35
Incapsulamento LLC (se non supportato: VCMUX/NULL)
Modulazione Multimode
Protocollo di autenticazione PAP o CHAP
PPOA/PPOE supportati da teletu,adesso sul SBS300 ho PPOE.
in attach il boot del router e l' esito del comando sh version
attendo fiducioso!!!!!
C870 series (Board ID: 1-148) platform with 13
Booting flash:/c870-advipservicesk9-mz.124-15.T7.bin
Self decompressing the image : #################################################
################### [OK]
Restricted Rights Legend
Use, duplication, or disclosure by the Government is
subject to restrictions as set forth in subparagraph
(c) of the Commercial Computer Software - Restricted
Rights clause at FAR sec. 52.227-19 and subparagraph
(c) (1) (ii) of the Rights in Technical Data and Computer
Software clause at DFARS sec. 252.227-701
cisco Systems, Inc.
170 West Tasman Drive
San Jose, California 95134-1706
Cisco IOS Software, C870 Software (C870-ADVIPSERV
RELEASE SOFTWARE (fc3)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2008 by Cisco Systems, Inc.
Compiled Thu 14-Aug-08 07:43 by prod_rel_team
Image text-base: 0x8002007C, data-base: 0x81EA5004
This product contains cryptographic features and is subject to United
States and local country laws governing import, export, transfer and
use. Delivery of Cisco cryptographic products does not imply
third-party authority to import, export, distribute or use encryption.
Importers, exporters, distributors and users are responsible for
compliance with U.S. and local country laws. By using this product you
agree to comply with applicable laws and regulations. If you are unable
to comply with U.S. and local laws, return this product immediately.
A summary of U.S. laws governing Cisco cryptographic products may be found at:
http://www.cisco.com/wwl/export/crypto/tool/stqrg.html
If you require further assistance please contact us by sending email to
export@cisco.com.
Installed image archive
Cisco 877 (MPC8272) processor (revision 0x400) with 118784K/12288K bytes of memo
ry.
Processor board ID FHK141272BW
MPC8272 CPU Rev: Part Number 0xC, Mask Number 0x10
4 FastEthernet interfaces
1 ATM interface
128K bytes of non-volatile configuration memory.
28672K bytes of processor board System flash (Intel Strataflash)
SETUP: new interface NVI0 placed in "shutdown" state
Press RETURN to get started!
*Mar 1 00:00:05.563: %VPN_HW-6-INFO_LOC: Crypto engine: onboard 0 State chan
d to: Initialized
*Mar 1 00:00:05.567: %VPN_HW-6-INFO_LOC: Crypto engine: onboard 0 State change
d to: Enabled
*Mar 1 00:00:07.515: %LINK-3-UPDOWN: Interface FastEthernet0, changed state to
up
*Mar 1 00:00:08.519: %LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthern
et0, changed state to up
*Mar 1 00:00:15.315: %LINEPROTO-5-UPDOWN: Line protocol on Interface NVI0, chan
ged state to up
*Mar 1 00:00:24.671: %SYS-5-CONFIG_I: Configured from memory by console
*Jun 24 19:39:52.411: %SYS-5-RESTART: Syst
Cisco IOS Software, C870 Software (C870-ADVIPSERVICESK9-M), Version 12.4(15)T7,
RELEASE SOFTWARE (fc3)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2008 by Cisco Systems, Inc.
Compiled Thu 14-Aug-08 07:43 by prod_rel_team
*Jun 24 19:39:52.411: %SNMP-5-COLDSTART: SNMP agent on host casa is undergoing a
cold start
*Jun 24 19:39:52.503: %CRYPTO-6-ISAKMP_ON_OFF: ISAKMP is OFF
*Jun 24 19:39:52.503: %CRYPTO-6-GDOI_ON_OFF: GDOI is OFF
*Jun 24 19:39:53.879: %LINK-5-CHANGED: Interface NVI0,
ratively down
*Jun 24 19:39:53.955: %LINK-3-UPDOWN: Interface FastEthernet3, changed state to
up
*Jun 24 19:39:53.959: %LINK-3-UPDOWN: Interface FastEthernet2, changed state to
up
*Jun 24 19:39:53.963: %LINK-3-UPDOWN: Inte
up
*Jun 24 19:39:53.967: %LINK-3-UPDOWN: Interface FastEthernet0, changed state to
up
*Jun 24 19:39:54.879: %LINEPROTO-5-UPDOWN: Line protocol on Interface NVI0, chan
ged state to down
*Jun 24 19:39:54.955: %LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthern
et3, changed state to down
*Jun 24 19:39:54.959: %LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthern
et2, changed state to down
*Jun 24 19:39:54.963: %LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthern
et1, changed state to down
*Jun 24 19:39:54.967: %LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthern
et0, changed state to down
casa>
casa>ena
Password:
casa#
casa#sh version
Cisco IOS Software, C870 Software (C870-ADVIPSERVICESK9-M), Version 12.4(15)T7,
RELEASE SOFTWARE (fc3)
Technical Support: http://www.cisco.com/
Copyright (c) 1986-2008 by Cisco Systems, Inc.
Compiled Thu 14-Aug-08 07:43 by prod_rel_team
ROM: System Bootstrap, Version 12.3(8r)YI4, RELEASE SOFTWARE
casa uptime is 1 minute
System returned to ROM
System image file is "flash:c870-advipservicesk9-mz.124-15.T7.bin"
This product contains cryptographic features and is subject to United
States and local country laws governing import, export, transfer and
use. Delivery of Cisco cryptographic products does not imply
third-party authority to import, export,
Importers, exporters, distributors and users are responsible for
compliance with U.S. and local country laws. By using this product you
agree to comply with applicable laws and regulations. If you are unable
to comply with U.S. and local laws, return this product immediately.
A summary of U.S. laws governing Cisco cryptographic products may be found at:
casa#
System Bootstrap, Version 12.3(8r)YI4, RELEASE SOFTWARE
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 2006 by cisco Systems, In
C870 series (Board ID: 1-148) platform with 131072 Kbytes of main memory
Booting flash:/c870-advipservicesk9-mz.124-15.T7.bin
Self decompressing the image : #################################################
################### [OK]
Restricted Rights Legend
Use, duplication, or disclosure by the Government is
subject to restrictions as set forth in subparagraph
(c) of the Commercial Computer Software - Restricted
Rights clause at FAR sec. 52.227-19 and subparagraph
(c) (1) (ii) of the Rights in Technical Data and Computer
Software clause at DFARS sec. 252.227-7013.
cisco Systems, Inc.
170 West Tasman Drive
San Jose, California 95134-1706
Cisco IOS Software, C870 Software (C870-ADVIPSERVICESK9-M), Version 12.4(15)T7,
RELEASE SOFTWARE (fc3)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2008 by Cisco Systems, Inc.
Compiled Thu 14-Aug-08 07:43 by prod_rel_team
Image text-base: 0x8002007C, data-base: 0x81EA5004
This product contains cryptographic features and is subject to United
States and local country laws governing import, export, transfer and
use. Delivery of Cisco cryptographic products does not imply
third-party authority to import, export, distribute or use encryption.
Importers, exporters, distributors and users are responsible for
compliance with U.S. and local country laws. By using this product you
agree to comply with applicable laws and regulations. If you are unable
to comply with U.S. and local laws, return this product immediately.
A summary of U.S. laws governing Cisco cryptographic products may be found at:
http://www.cisco.com/wwl/export/crypto/tool/stqrg.html
If you require further assistance please contact us by sending email to
export@cisco.com.
Installed image archive
Cisco 877 (MPC8272) processor (revision 0x400) with 118784K/12288K bytes of memo
ry.
Processor board ID FHK141272BW
MPC8272 CPU Rev: Part Number 0xC, Mask Number 0x10
4 FastEthernet interfaces
1 ATM interface
128K bytes of non-volatile configuration memory.
28672K bytes of processor board System flash (Intel Strataflash)
SETUP: new interface NVI0 placed in "shutdown" state
Press RETURN to get started!
*Mar 1 00:00:05.563: %VPN_HW-6-INFO_LOC: Crypto engine: onboard 0 State change
d to: Initialized
*Mar 1 00:00:05.567: %VPN_HW-6-INFO_LOC: Crypto engine: onboard 0 State change
d to: Enabled
*Mar 1 00:00:07.511: %LINK-3-UPDOWN: Interface FastEthernet0, changed state to
up
*Mar 1 00:00:08.511: %LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthern
et0, changed state to up
*Mar 1 00:00:15.155: %LINEPROTO-5-UPDOWN: Line protocol on Interface NVI0, chan
ged state to up
*Mar 1 00:00:24.527: %SYS
casa>
casa>-5-CONFIG_I: Configured from memory by console
*Jun 24 19:39:52.335: %SYS-5-RESTART: System restarted --
Cisco IOS Software, C870 Software (C870-ADVIPSERVICESK9-M), Version 12.4(15)T7,
RELEASE SOFTWARE (fc3)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2008 by Cisco Systems, Inc.
Compiled Thu 14-Aug-08 07:43 by prod_rel_team
*Jun 24 19:39:52.335: %SNMP-5-COLDSTART: SNMP agent on host casa is undergoing a
cold start
*Jun 24 19:39:52.495: %CRYPTO-6-ISAKMP_ON_OFF: ISAKMP is OFF
*Jun 24 19:39:52.495: %CRYPTO-6-GDOI_ON_OFF: GDOI is OFF
*Jun 24 19:39:53.875: %LINK-5-CHANGED: Interface NVI0, changed state to administ
ratively down
*Jun 24 19:39:53.951: %LINK-3-UPDOWN: Interface FastEthernet3, changed state to
up
*Jun 24 19:39:53.955: %LINK-3-UPDOWN: Interface FastEthernet2, changed state to
up
*Jun 24 19:39:53.963: %LINK-3-UPDOWN: Interface FastEthernet1, changed state to
up
*Jun 24 19:39:53.967: %LINK-3-UPDOWN: Interface FastEthernet0, changed state to
up
*Jun 24 19:39:54.87s5: %LINEPROTO-5-UPDOWN: Line protocol on Interface NVI0, cha
nged state to down
*Jun 24 19:39:54.951: %LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthern
et3, changed state to down
*Jun 24 19:39:54.955: %LINEPROTO-5-UPDOWN: Line protocol o
et2, changed state to down
*Jun 24 19:39:54.963: %LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthern
et1, changed state to down
*Jun 24 19:39:54.967: %LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthern
et0, changed state to downh conf
casa>
casa>sh version
Cisco IOS Software, C870 Software (C870-ADVIPSERVICESK9-M), Version 12.4(15)T7,
RELEASE SOFTWARE (fc3)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2008 by Cisco Systems, Inc.
Compiled Thu 14-Aug-08 07:43 by prod_rel_team
ROM: System Bootstrap, Version 12.3(8r)YI4, RELEASE SOFTWARE
casa uptime is 1 minute
System returned to ROM by power-on
System image file is "flash:c870-advipservicesk9-mz.124-15.T7.bin"
This product contains cryptographic features and is subject to United
States and local country laws governing import, export, transfer and
use. Delivery of Cisco cryptographic products does not imply
third-party authority to import, export, distribute or use encryption.
Importers, exporters, distributors and users are responsible for
compliance with U.S. and local country laws. By using this product you
agree to comply with applicable laws and regulations. If you are unable
to comply with U.S. and local laws, return this product immediately.
A summary of U.S. laws governing Cisco cryptographic products may be found at: |
|
Top |
|
|
uvula Mortale adepto
Registrato: 26/09/11 08:39 Messaggi: 31
|
Inviato: 01 Feb 2012 09:16 Oggetto: |
|
|
HAHAHAHA bastavano le ultime 20 righe...
prova questa l'ho fatta al volo dovrebbe funzionare come quelle di alice..
modifica i parametri che trovi in giro tipo hostname password varie e poi incolla...
verifica che funzioni e poi se tutto va (sopratutto le password di acesso)
fai un write mem o un copy running-config startup-config
buona fortuna!
!
no service pad
service timestamps debug uptime
service timestamps log uptime
service password-encryption
!
hostname (NOMEDELROUTER)
!
boot-start-marker
boot-end-marker
!
logging buffered 51200 warnings
!
no aaa new-model
!
!
dot11 syslog
!
!
ip cef
no ip domain lookup
!
archive
log config
hidekeys
!
ip dhcp pool client
import all
network 192.168.1.0 255.255.255.0
default-router 192.168.1.254
lease 0 2
!
interface ATM0
no ip address
pvc 8/35
encapsulation aal5mux ppp dialer
dialer pool-member 1
!
bundle-enable
dsl operating-mode auto
!
interface Dialer0
ip address negotiated
ip nat outside
encapsulation ppp
ip tcp header-compression passive
dialer pool 1
no cdp enable
ppp pap sent-username (NOMEUTENTE) password (PAROLACHIAVE)
!
ip nat inside source list 9 interface Dialer0 overload
!
interface FastEthernet0
!
interface FastEthernet1
!
interface FastEthernet2
!
interface FastEthernet3
!
interface Vlan1
description VLan1 - Connessa alla rete locale LAN
ip address 192.168.1.254 255.255.255.0
ip nat inside
ip virtual-reassembly
ip tcp adjust-mss 1452
hold-queue 100 out
no shutdown
ip classless
ip route 0.0.0.0 0.0.0.0 Dialer0
no ip http server
!
no ip http server
ip http access-class 23
ip http authentication local
no ip http secure-server
ip http timeout-policy idle 60 life 86400 requests 10000
!
access-list 9 permit 192.168.1.0 0.0.0.255
dialer-list 1 protocol ip permit
snmp-server community public RO 4
snmp-server enable traps tty
no cdp run
!
control-plane
!
!
line con 0
exec-timeout 120 0
login local
no modem enable
stopbits 1
password (PASSWORDACCESSOALLALINE0)
login
line aux 0
stopbits 1
line vty 0 4
access-class 23 in
exec-timeout 120 0
privilege level 15
password 7 (QUELLACHEVUOIPERACCESSODATELNETOSSH)
login
transport input telnet ssh
!
scheduler max-task-time 5000
end |
|
Top |
|
|
moreno Mortale pio
Registrato: 03/07/07 08:50 Messaggi: 26
|
Inviato: 01 Feb 2012 12:47 Oggetto: |
|
|
dopo he mi sono fatto 330 km con la neve e' gia' buono che non ti ho incollato altro..
Controllo stanotte quando arrivo a casa.
GRAZIE!!!!!!
Mo |
|
Top |
|
|
moreno Mortale pio
Registrato: 03/07/07 08:50 Messaggi: 26
|
Inviato: 03 Feb 2012 23:28 Oggetto: |
|
|
All' apice della distruzione fisica per stanchezza..ho testato il corretto funzionamento dello script che mi hai fornito...
Ho dovuto solo inserire i DNS e attivare la porta ATM,adesso ho un giocattolo nuovo da testare prima di mettere in pensione l' SBS.
Grazie di nuovo!!!!
Mo |
|
Top |
|
|
uvula Mortale adepto
Registrato: 26/09/11 08:39 Messaggi: 31
|
Inviato: 07 Feb 2012 23:31 Oggetto: |
|
|
felicissimo di esserti stato d'aiuto.
ciao alla prossima |
|
Top |
|
|
moreno Mortale pio
Registrato: 03/07/07 08:50 Messaggi: 26
|
Inviato: 11 Feb 2012 19:17 Oggetto: |
|
|
va che e` una scheggia!!!!
Gli ho attaccato un AP per il WIFI,un po' di DHCP reservation,port forwarding...non male.
Ti scoccio ancora una volta vuoi?
Se attacco un pc con la scheda di rete tutta in auto non naviga,devo metterci i DNS sulla scheda per andare,eppure ho messo i dns nel cisco...boh?
Anche l' AP,per far navigare i dispositivi wireless ha voluto i dns.
Hai voglia di dare un occhio?
GRAZIE!!!!!!
moreno@Alpha:~$ telnet 192.168.1.254
Trying 192.168.1.254...
Connected to 192.168.1.254.
Escape character is '^]'.
User Access Verification
Password:
cerbero#ena
cerbero#sh config
Using 2246 out of 131072 bytes
!
version 12.4
no service pad
service timestamps debug uptime
service timestamps log uptime
service password-encryption
!
hostname cerbero
!
boot-start-marker
boot-end-marker
!
logging buffered 51200 warnings
!
no aaa new-model
!
!
dot11 syslog
ip cef
!
!
no ip dhcp use vrf connected
!
ip dhcp pool client
import all
network 192.168.1.0 255.255.255.0
default-router 192.168.1.254
lease 0 2
!
ip dhcp pool Alpha
host 192.168.1.10 255.255.255.0
hardware-address 0025.22e2.980f
client-name Alpha
!
!
no ip domain lookup
ip name-server 8.8.8.8
ip name-server 8.8.4.4
ip name-server 208.67.222.222
ip name-server 208.67.220.220
!
multilink bundle-name authenticated
!
!
!
!
archive
log config
hidekeys
!
!
!
!
!
interface ATM0
no ip address
no atm ilmi-keepalive
pvc 8/35
encapsulation aal5mux ppp dialer
dialer pool-member 1
!
bundle-enable
dsl operating-mode auto
!
interface FastEthernet0
!
interface FastEthernet1
!
interface FastEthernet2
!
interface FastEthernet3
!
interface Vlan1
description VLan1 - Connessa alla rete locale LAN
ip address 192.168.1.254 255.255.255.0
ip nat inside
ip virtual-reassembly
ip tcp adjust-mss 1452
hold-queue 100 out
!
interface Dialer0
ip address negotiated
ip nat outside
ip virtual-reassembly
encapsulation ppp
ip tcp header-compression
dialer pool 1
no cdp enable
ppp pap sent-username teletu.it password 7
!
ip forward-protocol nd
ip route 0.0.0.0 0.0.0.0 Dialer0
!
!
no ip http server
ip http access-class 23
ip http authentication local
no ip http secure-server
ip http timeout-policy idle 60 life 86400 requests 10000
ip nat inside source list 9 interface Dialer0 overload
ip nat inside source static tcp 192.168.1.10 6000 interface FastEthernet3 6000
!
access-list 9 permit 192.168.1.0 0.0.0.255
dialer-list 1 protocol ip permit
snmp-server community public RO 4
snmp-server enable traps tty
no cdp run
!
!
!
!
control-plane
!
!
line con 0
exec-timeout 120 0
password
login
no modem enable
stopbits 1
line aux 0
stopbits 1
line vty 0 4
access-class 23 in
exec-timeout 120 0
privilege level 15
password
login
transport input telnet ssh
!
scheduler max-task-time 5000
end |
|
Top |
|
|
|
|
Non puoi inserire nuovi argomenti Non puoi rispondere a nessun argomento Non puoi modificare i tuoi messaggi Non puoi cancellare i tuoi messaggi Non puoi votare nei sondaggi
|
|