Indice del forum Olimpo Informatico
I Forum di Zeus News
Leggi la newsletter gratuita - Attiva il Menu compatto
 
 FAQFAQ   CercaCerca   Lista utentiLista utenti   GruppiGruppi   RegistratiRegistrati 
 ProfiloProfilo   Messaggi privatiMessaggi privati   Log inLog in 

    Newsletter RSS Facebook Twitter Contatti Ricerca
PC blocco improvviso e avvio lento
Nuovo argomento   Rispondi    Indice del forum -> Dal processore al case
Precedente :: Successivo  
Autore Messaggio
delfina1982
Eroe
Eroe


Registrato: 05/05/07 09:53
Messaggi: 69

MessaggioInviato: 09 Ott 2018 15:35    Oggetto: PC blocco improvviso e avvio lento Rispondi citando

Buonasera, ho un problema con il mio Pc da un po', praticamente all'improvviso si blocca e nn c'è nulla da fare se nn forzare l arresto. Al riavvio però continua a non ripartire o a volte parte lentamente, nel senso che inizia a caricare Windows.. poi si ferma e mi accorgo che il led rosso dell' hard disk è completamente spento senza dare i classici segni di vita lampeggianti,dopo poco fa un po' di lampeggianti e il caricamento va un pochino avanti z poi fermarsi di nuovo. Il più Delle volte si è risolto aprendo il case ed estraendo le RAM, x poi rimetterle. Solo così riparte .. ma nn so se o solo un caso... Cosa può essere? Ho un dual core con SO Windows 7 64bit E 4 giga di RAM.. ho provato ad avviare solo con 2ram alla volta ma nn è cambiato nulla.. una volta è partito con solo 2giga , altre volte solo con 4 .. nn so più come fare.essendo vekkiotto nn vorrei portarlo in assistenza e spenderci troppo. Grazie x l attenzione
Top
Profilo Invia messaggio privato
Maary79
Moderatrice Sistemi Operativi e Software
Moderatrice Sistemi Operativi e Software


Registrato: 08/02/12 12:23
Messaggi: 6984

MessaggioInviato: 09 Ott 2018 21:54    Oggetto: Rispondi citando

Io comincerei a testare la ram con memtest link
E controllare la salute dell'hdd con gsmartcontrol link
Top
Profilo Invia messaggio privato
delfina1982
Eroe
Eroe


Registrato: 05/05/07 09:53
Messaggi: 69

MessaggioInviato: 09 Ott 2018 23:15    Oggetto: Rispondi citando

Se riesco a farlo partire domani provo.. oggi non c'è stato verso 😞 grazie
Top
Profilo Invia messaggio privato
Maary79
Moderatrice Sistemi Operativi e Software
Moderatrice Sistemi Operativi e Software


Registrato: 08/02/12 12:23
Messaggi: 6984

MessaggioInviato: 10 Ott 2018 08:25    Oggetto: Rispondi citando

Se magari provi a descrivere esattamente cosa accade quando proprio non si avvia, possiamo fare delle ipotesi.

Ci sarebbe un altro modo volendo. Provare ad avviare un live di Linux così da non avviare il pc dall'hdd. Il live di Linux include anche memtest, e la possibilità di controllare la salute dell'hdd del pc.

In breve dovresti masterizzare l'immagine (iso) di Linux in un dvd (o fare una chiavetta usb avviabile), dire al pc (dal bios) di avviarsi con il dvd o la usb, e selezionare la voce 'prova senza installare'.

Se vedi che va in loop (tipo scritte che scorrono all'impazzata) vuol dire che c'è qualche problema hardware, se ti carica un desktop (simile a Windows a primo occhio) vuol dire che a livello hardware poresti essere a posto. Ad esclusione dell'hdd del pc, che in pratica, non lo stai usando, perchè il pc è avviato da usb o dvd.
Troverai un utilità chiamata dischi (disks se in inglese), dove potrai controllare i dati smart, e se il disco è ok (test automatici superati).

Però in ogni caso ti serve un pc per creare il supporto.
Puoi scaricare Lubuntu da qui: link

Masterizzarlo su un dvd con un qualsiasi programma per masterizzare (come immagine disco).

Oppure su usb con Rufus. link

Impostandolo come da immagine.
Top
Profilo Invia messaggio privato
delfina1982
Eroe
Eroe


Registrato: 05/05/07 09:53
Messaggi: 69

MessaggioInviato: 11 Ott 2018 14:32    Oggetto: Rispondi citando

sono riuscita ad avviarlo e fatto il test dell HD il risultato è questo :

smartctl 6.6 2017-11-05 r4594 [i686-w64-mingw32-win7(64)-sp1] (sf-6.6-1)
Copyright (C) 2002-17, Bruce Allen, Christian Franke, www.smartmontools.org

=== START OF INFORMATION SECTION ===
Model Family: Seagate Barracuda 7200.14 (AF)
Device Model: ST500DM002-1BD142
Serial Number: W3T43V51
LU WWN Device Id: 5 000c50 072ed3580
Firmware Version: HP73
User Capacity: 500.107.862.016 bytes [500 GB]
Sector Sizes: 512 bytes logical, 4096 bytes physical
Rotation Rate: 7200 rpm
Device is: In smartctl database [for details use: -P show]
ATA Version is: ATA8-ACS T13/1699-D revision 4
SATA Version is: SATA 3.0, 6.0 Gb/s (current: 3.0 Gb/s)
Local Time is: Thu Oct 11 15:22:31 2018
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
AAM feature is: Unavailable
APM feature is: Unavailable
Rd look-ahead is: Enabled
Write cache is: Enabled
DSN feature is: Unavailable
ATA Security is: Disabled, NOT FROZEN [SEC1]

=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED

General SMART Values:
Offline data collection status: (0x82) Offline data collection activity
was completed without error.
Auto Offline Data Collection: Enabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: ( 600) seconds.
Offline data collection
capabilities: (0x5b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
No Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 2) minutes.
Extended self-test routine
recommended polling time: ( 79) minutes.
SCT capabilities: (0x103b) SCT Status supported.
SCT Error Recovery Control supported.
SCT Feature Control supported.
SCT Data Table supported.

SMART Attributes Data Structure revision number: 10
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
1 Raw_Read_Error_Rate POSR-K 092 079 006 - 11277128
3 Spin_Up_Time PO---K 100 100 000 - 0
4 Start_Stop_Count -O--CK 097 097 020 - 3192
5 Reallocated_Sector_Ct PO--CK 100 100 036 - 16
7 Seek_Error_Rate POSR-K 086 060 030 - 449945013
9 Power_On_Hours -O--CK 084 084 000 - 14485
10 Spin_Retry_Count PO--CK 100 100 097 - 0
12 Power_Cycle_Count -O--CK 099 099 020 - 1339
180 Unknown_HDD_Attribute PO-R-K 100 100 000 - 1998462530
183 Runtime_Bad_Block -O--CK 100 100 000 - 0
184 End-to-End_Error PO--CK 100 100 097 - 0
187 Reported_Uncorrect -O--CK 001 001 000 - 2687
188 Command_Timeout -O--CK 100 099 000 - 1 1 23
189 High_Fly_Writes -O-RCK 100 100 000 - 0
190 Airflow_Temperature_Cel -O---K 063 053 045 - 37 (Min/Max 28/37)
194 Temperature_Celsius -O---K 037 047 000 - 37 (0 15 0 0 0)
195 Hardware_ECC_Recovered -O-RCK 059 039 000 - 11277128
196 Reallocated_Event_Count -O--CK 100 100 036 - 16
197 Current_Pending_Sector -O--CK 100 100 000 - 8
198 Offline_Uncorrectable ----CK 100 100 000 - 0
199 UDMA_CRC_Error_Count -O--CK 200 200 000 - 0
||||||_ K auto-keep
|||||__ C event count
||||___ R error rate
|||____ S speed/performance
||_____ O updated online
|______ P prefailure warning

General Purpose Log Directory Version 1
SMART Log Directory Version 1 [multi-sector log support]
Address Access R/W Size Description
0x00 GPL,SL R/O 1 Log Directory
0x01 SL R/O 1 Summary SMART error log
0x02 SL R/O 5 Comprehensive SMART error log
0x03 GPL R/O 5 Ext. Comprehensive SMART error log
0x06 SL R/O 1 SMART self-test log
0x07 GPL R/O 1 Extended self-test log
0x09 SL R/W 1 Selective self-test log
0x10 GPL R/O 1 NCQ Command Error log
0x11 GPL R/O 1 SATA Phy Event Counters log
0x21 GPL R/O 1 Write stream error log
0x22 GPL R/O 1 Read stream error log
0x80-0x9f GPL,SL R/W 16 Host vendor specific log
0xa1 GPL,SL VS 20 Device vendor specific log
0xa2 GPL VS 2248 Device vendor specific log
0xa8 GPL,SL VS 129 Device vendor specific log
0xa9 GPL,SL VS 1 Device vendor specific log
0xab GPL VS 1 Device vendor specific log
0xb0 GPL VS 2928 Device vendor specific log
0xbd GPL VS 252 Device vendor specific log
0xbe-0xbf GPL VS 65535 Device vendor specific log
0xe0 GPL,SL R/W 1 SCT Command/Status
0xe1 GPL,SL R/W 1 SCT Data Transfer

SMART Extended Comprehensive Error Log Version: 1 (5 sectors)
Device Error Count: 2794 (device log contains only the most recent 20 errors)
CR = Command Register
FEATR = Features Register
COUNT = Count (was: Sector Count) Register
LBA_48 = Upper bytes of LBA High/Mid/Low Registers ] ATA-8
LH = LBA High (was: Cylinder High) Register ] LBA
LM = LBA Mid (was: Cylinder Low) Register ] Register
LL = LBA Low (was: Sector Number) Register ]
DV = Device (was: Device/Head) Register
DC = Device Control Register
ER = Error register
ST = Status register
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.

Error 2794 [13] occurred at disk power-on lifetime: 14485 hours (603 days + 13 hours)
When the command that caused the error occurred, the device was active or idle.

After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
40 -- 51 00 00 00 00 00 61 7c 18 00 00 Error: UNC at LBA = 0x00617c18 = 6388760

Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
25 00 00 00 20 00 00 00 61 7c 00 e0 00 00:22:32.457 READ DMA EXT
35 00 00 00 20 00 00 00 5f 42 80 e0 00 00:22:32.456 WRITE DMA EXT
25 00 00 00 20 00 00 00 2a b1 ac e0 00 00:22:32.456 READ DMA EXT
35 00 00 00 08 00 00 00 1b 3a 58 e0 00 00:22:32.456 WRITE DMA EXT
35 00 00 00 80 00 00 00 16 da c0 e0 00 00:22:32.455 WRITE DMA EXT

Error 2793 [12] occurred at disk power-on lifetime: 14485 hours (603 days + 13 hours)
When the command that caused the error occurred, the device was active or idle.

After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
40 -- 51 00 00 00 00 00 61 7c 18 00 00 Error: UNC at LBA = 0x00617c18 = 6388760

Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
25 00 00 00 20 00 00 00 61 7c 00 e0 00 00:22:28.511 READ DMA EXT
25 00 00 00 20 00 00 00 2a b1 8c e0 00 00:22:28.495 READ DMA EXT
35 00 00 00 08 00 00 00 1b 3a 48 e0 00 00:22:28.494 WRITE DMA EXT
25 00 00 00 08 00 00 16 a6 27 f8 e0 00 00:22:28.470 READ DMA EXT
35 00 00 00 08 00 00 00 62 d4 70 e0 00 00:22:28.470 WRITE DMA EXT

Error 2792 [11] occurred at disk power-on lifetime: 14485 hours (603 days + 13 hours)
When the command that caused the error occurred, the device was active or idle.

After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
40 -- 51 00 00 00 00 00 61 7c 18 00 00 Error: UNC at LBA = 0x00617c18 = 6388760

Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
25 00 00 00 20 00 00 00 61 7c 00 e0 00 00:22:24.039 READ DMA EXT
35 00 00 00 50 00 00 00 5f 41 b0 e0 00 00:22:24.038 WRITE DMA EXT
25 00 00 00 20 00 00 00 2a b0 4c e0 00 00:22:24.037 READ DMA EXT
35 00 00 00 b8 00 00 00 0c b9 18 e0 00 00:22:24.037 WRITE DMA EXT
35 00 00 00 08 00 00 00 08 76 b0 e0 00 00:22:24.036 WRITE DMA EXT

Error 2791 [10] occurred at disk power-on lifetime: 14485 hours (603 days + 13 hours)
When the command that caused the error occurred, the device was active or idle.

After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
40 -- 51 00 00 00 00 00 61 7c 18 00 00 Error: UNC at LBA = 0x00617c18 = 6388760

Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
25 00 00 00 20 00 00 00 61 7c 00 e0 00 00:22:20.226 READ DMA EXT
25 00 00 00 20 00 00 00 2a b0 2c e0 00 00:22:20.218 READ DMA EXT
25 00 00 00 20 00 00 00 26 c2 b3 e0 00 00:22:20.201 READ DMA EXT
ea 00 00 00 00 62 c6 9f 00 00 00 a0 00 00:22:20.122 FLUSH CACHE EXT
35 00 00 01 00 00 00 20 62 c5 a0 e0 00 00:22:20.121 WRITE DMA EXT

Error 2790 [9] occurred at disk power-on lifetime: 14485 hours (603 days + 13 hours)
When the command that caused the error occurred, the device was active or idle.

After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
40 -- 51 00 00 00 00 00 61 7c 18 00 00 Error: UNC at LBA = 0x00617c18 = 6388760

Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
25 00 00 00 20 00 00 00 61 7c 00 e0 00 00:22:15.678 READ DMA EXT
35 00 00 00 20 00 00 00 5f 41 38 e0 00 00:22:15.678 WRITE DMA EXT
35 00 00 00 30 00 00 00 33 97 20 e0 00 00:22:15.677 WRITE DMA EXT
35 00 00 00 01 00 00 00 07 2e 40 e0 00 00:22:15.677 WRITE DMA EXT
35 00 00 01 00 00 00 00 05 04 08 e0 00 00:22:15.675 WRITE DMA EXT

Error 2789 [8] occurred at disk power-on lifetime: 14485 hours (603 days + 13 hours)
When the command that caused the error occurred, the device was active or idle.

After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
40 -- 51 00 00 00 00 00 61 7c 18 00 00 Error: UNC at LBA = 0x00617c18 = 6388760

Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
25 00 00 00 20 00 00 00 61 7c 00 e0 00 00:22:11.761 READ DMA EXT
35 00 00 00 08 00 00 16 a2 8c d8 e0 00 00:22:11.423 WRITE DMA EXT
35 00 00 00 10 00 00 00 62 cb 58 e0 00 00:22:11.334 WRITE DMA EXT
35 00 00 00 08 00 00 00 62 cb 30 e0 00 00:22:11.334 WRITE DMA EXT
35 00 00 00 08 00 00 00 62 cb 18 e0 00 00:22:11.334 WRITE DMA EXT

Error 2788 [7] occurred at disk power-on lifetime: 14485 hours (603 days + 13 hours)
When the command that caused the error occurred, the device was active or idle.

After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
40 -- 51 00 00 00 00 00 61 7c 18 00 00 Error: UNC at LBA = 0x00617c18 = 6388760

Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
25 00 00 00 20 00 00 00 61 7c 00 e0 00 00:21:50.889 READ DMA EXT
35 00 00 00 20 00 00 00 5f 3a a8 e0 00 00:21:50.888 WRITE DMA EXT
35 00 00 00 38 00 00 25 9d 4e e8 e0 00 00:21:50.888 WRITE DMA EXT
35 00 00 00 38 00 00 25 9d 4d e8 e0 00 00:21:50.887 WRITE DMA EXT
35 00 00 00 28 00 00 24 76 39 70 e0 00 00:21:50.886 WRITE DMA EXT

Error 2787 [6] occurred at disk power-on lifetime: 14485 hours (603 days + 13 hours)
When the command that caused the error occurred, the device was active or idle.

After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
40 -- 51 00 00 00 00 00 61 7c 18 00 00 Error: UNC at LBA = 0x00617c18 = 6388760

Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
25 00 00 00 20 00 00 00 61 7c 00 e0 00 00:21:47.054 READ DMA EXT
35 00 00 00 48 00 00 00 5f 3a 60 e0 00 00:21:47.053 WRITE DMA EXT
35 00 00 00 b8 00 00 00 0c b9 18 e0 00 00:21:47.053 WRITE DMA EXT
35 00 00 00 60 00 00 00 04 db 68 e0 00 00:21:47.052 WRITE DMA EXT
ea 00 00 00 00 61 5d bf 00 00 00 a0 00 00:21:46.643 FLUSH CACHE EXT

Error 2786 [5] occurred at disk power-on lifetime: 14485 hours (603 days + 13 hours)
When the command that caused the error occurred, the device was active or idle.

After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
40 -- 51 00 00 00 00 00 61 7c 18 00 00 Error: UNC at LBA = 0x00617c18 = 6388760

Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
25 00 00 00 20 00 00 00 61 7c 00 e0 00 00:21:42.345 READ DMA EXT
35 00 00 00 30 00 00 00 5f 39 50 e0 00 00:21:42.344 WRITE DMA EXT
35 00 00 00 08 00 00 00 20 16 18 e0 00 00:21:42.344 WRITE DMA EXT
35 00 00 00 08 00 00 00 1a d2 f0 e0 00 00:21:42.343 WRITE DMA EXT
35 00 00 01 00 00 00 1d cd b9 38 e0 00 00:21:42.341 WRITE DMA EXT

Error 2785 [4] occurred at disk power-on lifetime: 14485 hours (603 days + 13 hours)
When the command that caused the error occurred, the device was active or idle.

After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
40 -- 51 00 00 00 00 00 61 7c 18 00 00 Error: UNC at LBA = 0x00617c18 = 6388760

Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
25 00 00 00 20 00 00 00 61 7c 00 e0 00 00:21:38.549 READ DMA EXT
35 00 00 00 08 00 00 00 5e b3 98 e0 00 00:21:38.548 WRITE DMA EXT
ea 00 00 00 00 5e b3 97 00 00 00 a0 00 00:21:38.484 FLUSH CACHE EXT
35 00 00 00 08 00 00 00 5e b3 90 e0 00 00:21:38.483 WRITE DMA EXT
35 00 00 00 e0 00 00 00 15 71 38 e0 00 00:21:38.482 WRITE DMA EXT

Error 2784 [3] occurred at disk power-on lifetime: 14485 hours (603 days + 13 hours)
When the command that caused the error occurred, the device was active or idle.

After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
40 -- 51 00 00 00 00 00 61 7c 18 00 00 Error: UNC at LBA = 0x00617c18 = 6388760

Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
25 00 00 00 20 00 00 00 61 7c 00 e0 00 00:21:33.814 READ DMA EXT
35 00 00 00 10 00 00 0a eb 41 08 e0 00 00:21:33.813 WRITE DMA EXT
25 00 00 00 01 00 00 0a 15 e4 5f e0 00 00:21:33.796 READ DMA EXT
35 00 00 00 20 00 00 00 d6 51 60 e0 00 00:21:33.796 WRITE DMA EXT
35 00 00 00 08 00 00 00 63 db 18 e0 00 00:21:33.795 WRITE DMA EXT

Error 2783 [2] occurred at disk power-on lifetime: 14485 hours (603 days + 13 hours)
When the command that caused the error occurred, the device was active or idle.

After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
40 -- 51 00 00 00 00 00 61 7c 18 00 00 Error: UNC at LBA = 0x00617c18 = 6388760

Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
25 00 00 00 20 00 00 00 61 7c 00 e0 00 00:21:29.988 READ DMA EXT
25 00 00 00 40 00 00 00 1b 14 b2 e0 00 00:21:29.746 READ DMA EXT
25 00 00 00 40 00 00 00 1b 13 02 e0 00 00:21:29.680 READ DMA EXT
35 00 00 00 08 00 00 0d 7b 07 30 e0 00 00:21:29.338 WRITE DMA EXT
35 00 00 00 18 00 00 24 76 5c e8 e0 00 00:21:29.337 WRITE DMA EXT

Error 2782 [1] occurred at disk power-on lifetime: 14485 hours (603 days + 13 hours)
When the command that caused the error occurred, the device was active or idle.

After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
40 -- 51 00 00 00 00 00 61 7c 18 00 00 Error: UNC at LBA = 0x00617c18 = 6388760

Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
25 00 00 00 20 00 00 00 61 7c 00 e0 00 00:20:56.261 READ DMA EXT
35 00 00 00 30 00 00 00 5f 33 90 e0 00 00:20:56.260 WRITE DMA EXT
35 00 00 00 60 00 00 00 04 ba 50 e0 00 00:20:56.260 WRITE DMA EXT
35 00 00 00 40 00 00 37 89 a8 18 e0 00 00:20:56.259 WRITE DMA EXT
35 00 00 01 00 00 00 37 89 a7 18 e0 00 00:20:56.258 WRITE DMA EXT

Error 2781 [0] occurred at disk power-on lifetime: 14485 hours (603 days + 13 hours)
When the command that caused the error occurred, the device was active or idle.

After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
40 -- 51 00 00 00 00 00 61 7c 18 00 00 Error: UNC at LBA = 0x00617c18 = 6388760

Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
25 00 00 00 20 00 00 00 61 7c 00 e0 00 00:20:52.339 READ DMA EXT
35 00 00 00 01 00 00 0a 15 e4 0f e0 00 00:20:52.146 WRITE DMA EXT
25 00 00 00 01 00 00 0a 15 e4 0f e0 00 00:20:52.146 READ DMA EXT
35 00 00 00 01 00 00 0a 15 e4 02 e0 00 00:20:52.143 WRITE DMA EXT
25 00 00 00 01 00 00 0a 15 e4 02 e0 00 00:20:52.070 READ DMA EXT

Error 2780 [19] occurred at disk power-on lifetime: 14485 hours (603 days + 13 hours)
When the command that caused the error occurred, the device was active or idle.

After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
40 -- 51 00 00 00 00 00 61 7c 18 00 00 Error: UNC at LBA = 0x00617c18 = 6388760

Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
25 00 00 00 20 00 00 00 61 7c 00 e0 00 00:20:48.075 READ DMA EXT
35 00 00 00 b8 00 00 37 89 a6 60 e0 00 00:20:48.074 WRITE DMA EXT
35 00 00 00 08 00 00 11 3c 18 28 e0 00 00:20:48.073 WRITE DMA EXT
35 00 00 00 18 00 00 0a eb 41 00 e0 00 00:20:48.072 WRITE DMA EXT
25 00 00 00 01 00 00 0a 15 e3 ed e0 00 00:20:47.967 READ DMA EXT

Error 2779 [18] occurred at disk power-on lifetime: 14485 hours (603 days + 13 hours)
When the command that caused the error occurred, the device was active or idle.

After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
40 -- 51 00 00 00 00 00 61 7c 18 00 00 Error: UNC at LBA = 0x00617c18 = 6388760

Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
25 00 00 00 20 00 00 00 61 7c 00 e0 00 00:20:44.210 READ DMA EXT
35 00 00 00 01 00 00 37 89 a6 f9 e0 00 00:20:44.206 WRITE DMA EXT
25 00 00 00 01 00 00 37 89 a6 f9 e0 00 00:20:44.206 READ DMA EXT
35 00 00 00 01 00 00 0a 15 e3 e4 e0 00 00:20:44.199 WRITE DMA EXT
25 00 00 00 01 00 00 0a 15 e3 e4 e0 00 00:20:44.199 READ DMA EXT

Error 2778 [17] occurred at disk power-on lifetime: 14485 hours (603 days + 13 hours)
When the command that caused the error occurred, the device was active or idle.

After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
40 -- 51 00 00 00 00 00 61 7c 18 00 00 Error: UNC at LBA = 0x00617c18 = 6388760

Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
25 00 00 00 20 00 00 00 61 7c 00 e0 00 00:20:39.970 READ DMA EXT
35 00 00 00 58 00 00 00 5f 32 38 e0 00 00:20:39.970 WRITE DMA EXT
35 00 00 00 40 00 00 00 33 97 20 e0 00 00:20:39.969 WRITE DMA EXT
35 00 00 00 20 00 00 00 25 1f e0 e0 00 00:20:39.969 WRITE DMA EXT
35 00 00 01 00 00 00 00 25 1e e0 e0 00 00:20:39.968 WRITE DMA EXT

Error 2777 [16] occurred at disk power-on lifetime: 14485 hours (603 days + 13 hours)
When the command that caused the error occurred, the device was active or idle.

After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
40 -- 51 00 00 00 00 00 61 7c 18 00 00 Error: UNC at LBA = 0x00617c18 = 6388760

Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
25 00 00 00 20 00 00 00 61 7c 00 e0 00 00:20:36.206 READ DMA EXT
35 00 00 00 08 00 00 0a eb 41 10 e0 00 00:20:35.323 WRITE DMA EXT
35 00 00 00 08 00 00 11 3c 18 28 e0 00 00:20:35.322 WRITE DMA EXT
ea 00 00 00 00 5e b3 9f 00 00 00 a0 00 00:20:34.777 FLUSH CACHE EXT
35 00 00 00 08 00 00 00 5e b3 98 e0 00 00:20:34.777 WRITE DMA EXT

Error 2776 [15] occurred at disk power-on lifetime: 14485 hours (603 days + 13 hours)
When the command that caused the error occurred, the device was active or idle.

After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
40 -- 51 00 00 00 00 00 61 7c 18 00 00 Error: UNC at LBA = 0x00617c18 = 6388760

Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
25 00 00 00 20 00 00 00 61 7c 00 e0 00 00:19:52.393 READ DMA EXT
35 00 00 00 08 00 00 00 5e b3 98 e0 00 00:19:52.392 WRITE DMA EXT
35 00 00 00 08 00 00 00 03 33 80 e0 00 00:19:52.392 WRITE DMA EXT
ea 00 00 00 00 89 a6 5f 00 00 00 a0 00 00:19:52.342 FLUSH CACHE EXT
35 00 00 00 50 00 00 37 89 a6 10 e0 00 00:19:52.342 WRITE DMA EXT

Error 2775 [14] occurred at disk power-on lifetime: 14485 hours (603 days + 13 hours)
When the command that caused the error occurred, the device was active or idle.

After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
40 -- 51 00 00 00 00 00 61 7c 18 00 00 Error: UNC at LBA = 0x00617c18 = 6388760

Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
25 00 00 00 20 00 00 00 61 7c 00 e0 00 00:19:48.475 READ DMA EXT
35 00 00 00 01 00 00 37 89 a6 39 e0 00 00:19:48.450 WRITE DMA EXT
25 00 00 00 01 00 00 37 89 a6 39 e0 00 00:19:48.450 READ DMA EXT
35 00 00 00 01 00 00 37 89 a6 29 e0 00 00:19:48.450 WRITE DMA EXT
25 00 00 00 01 00 00 37 89 a6 29 e0 00 00:19:48.450 READ DMA EXT

SMART Extended Self-test Log Version: 1 (1 sectors)
No self-tests have been logged. [To run self-tests, use: smartctl -t]

SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.

SCT Status Version: 3
SCT Version (vendor specific): 522 (0x020a)
SCT Support Level: 1
Device State: Active (0)
Current Temperature: 36 Celsius
Power Cycle Min/Max Temperature: 28/36 Celsius
Lifetime Min/Max Temperature: 15/47 Celsius
Under/Over Temperature Limit Count: 0/0

SCT Temperature History Version: 2
Temperature Sampling Period: 1 minute
Temperature Logging Interval: 59 minutes
Min/Max recommended Temperature: 14/55 Celsius
Min/Max Temperature Limit: 10/60 Celsius
Temperature History Size (Index): 128 (116)

Index Estimated Time Temperature Celsius
117 2018-10-06 10:07 ? -
118 2018-10-06 11:06 25 ******
119 2018-10-06 12:05 ? -
120 2018-10-06 13:04 25 ******
121 2018-10-06 14:03 ? -
122 2018-10-06 15:02 25 ******
123 2018-10-06 16:01 ? -
124 2018-10-06 17:00 25 ******
125 2018-10-06 17:59 ? -
126 2018-10-06 18:58 25 ******
127 2018-10-06 19:57 ? -
0 2018-10-06 20:56 25 ******
1 2018-10-06 21:55 ? -
2 2018-10-06 22:54 26 *******
3 2018-10-06 23:53 ? -
4 2018-10-07 00:52 26 *******
5 2018-10-07 01:51 ? -
6 2018-10-07 02:50 26 *******
7 2018-10-07 03:49 ? -
8 2018-10-07 04:48 26 *******
9 2018-10-07 05:47 ? -
10 2018-10-07 06:46 26 *******
11 2018-10-07 07:45 ? -
12 2018-10-07 08:44 26 *******
13 2018-10-07 09:43 ? -
14 2018-10-07 10:42 26 *******
15 2018-10-07 11:41 ? -
16 2018-10-07 12:40 26 *******
17 2018-10-07 13:39 ? -
18 2018-10-07 14:38 26 *******
19 2018-10-07 15:37 ? -
20 2018-10-07 16:36 26 *******
21 2018-10-07 17:35 ? -
22 2018-10-07 18:34 26 *******
23 2018-10-07 19:33 ? -
24 2018-10-07 20:32 26 *******
25 2018-10-07 21:31 ? -
26 2018-10-07 22:30 26 *******
27 2018-10-07 23:29 ? -
28 2018-10-08 00:28 26 *******
29 2018-10-08 01:27 ? -
30 2018-10-08 02:26 26 *******
31 2018-10-08 03:25 ? -
32 2018-10-08 04:24 26 *******
33 2018-10-08 05:23 ? -
34 2018-10-08 06:22 26 *******
35 2018-10-08 07:21 ? -
36 2018-10-08 08:20 26 *******
37 2018-10-08 09:19 ? -
38 2018-10-08 10:18 26 *******
39 2018-10-08 11:17 ? -
40 2018-10-08 12:16 26 *******
41 2018-10-08 13:15 ? -
42 2018-10-08 14:14 26 *******
43 2018-10-08 15:13 ? -
44 2018-10-08 16:12 27 ********
45 2018-10-08 17:11 ? -
46 2018-10-08 18:10 27 ********
47 2018-10-08 19:09 ? -
48 2018-10-08 20:08 27 ********
49 2018-10-08 21:07 ? -
50 2018-10-08 22:06 27 ********
51 2018-10-08 23:05 ? -
52 2018-10-09 00:04 27 ********
53 2018-10-09 01:03 ? -
54 2018-10-09 02:02 27 ********
55 2018-10-09 03:01 ? -
56 2018-10-09 04:00 28 *********
57 2018-10-09 04:59 ? -
58 2018-10-09 05:58 28 *********
59 2018-10-09 06:57 ? -
60 2018-10-09 07:56 28 *********
61 2018-10-09 08:55 ? -
62 2018-10-09 09:54 29 **********
63 2018-10-09 10:53 ? -
64 2018-10-09 11:52 35 ****************
65 2018-10-09 12:51 ? -
66 2018-10-09 13:50 37 ******************
67 2018-10-09 14:49 ? -
68 2018-10-09 15:48 40 *********************
69 2018-10-09 16:47 ? -
70 2018-10-09 17:46 37 ******************
71 2018-10-09 18:45 ? -
72 2018-10-09 19:44 37 ******************
73 2018-10-09 20:43 ? -
74 2018-10-09 21:42 38 *******************
75 2018-10-09 22:41 ? -
76 2018-10-09 23:40 38 *******************
77 2018-10-10 00:39 ? -
78 2018-10-10 01:38 38 *******************
79 2018-10-10 02:37 ? -
80 2018-10-10 03:36 38 *******************
81 2018-10-10 04:35 ? -
82 2018-10-10 05:34 38 *******************
83 2018-10-10 06:33 ? -
84 2018-10-10 07:32 38 *******************
85 2018-10-10 08:31 ? -
86 2018-10-10 09:30 38 *******************
87 2018-10-10 10:29 ? -
88 2018-10-10 11:28 38 *******************
89 2018-10-10 12:27 ? -
90 2018-10-10 13:26 38 *******************
91 2018-10-10 14:25 ? -
92 2018-10-10 15:24 37 ******************
93 2018-10-10 16:23 ? -
94 2018-10-10 17:22 37 ******************
95 2018-10-10 18:21 ? -
96 2018-10-10 19:20 37 ******************
97 2018-10-10 20:19 ? -
98 2018-10-10 21:18 37 ******************
99 2018-10-10 22:17 ? -
100 2018-10-10 23:16 37 ******************
101 2018-10-11 00:15 ? -
102 2018-10-11 01:14 37 ******************
103 2018-10-11 02:13 ? -
104 2018-10-11 03:12 37 ******************
105 2018-10-11 04:11 ? -
106 2018-10-11 05:10 37 ******************
107 2018-10-11 06:09 ? -
108 2018-10-11 07:08 37 ******************
109 2018-10-11 08:07 ? -
110 2018-10-11 09:06 37 ******************
111 2018-10-11 10:05 ? -
112 2018-10-11 11:04 37 ******************
113 2018-10-11 12:03 ? -
114 2018-10-11 13:02 25 ******
115 2018-10-11 14:01 ? -
116 2018-10-11 15:00 28 *********

SCT Error Recovery Control:
Read: Disabled
Write: Disabled

Device Statistics (GP/SMART Log 0x04) not supported

SATA Phy Event Counters (GP Log 0x11)
ID Size Value Description
0x000a 2 1 Device-to-host register FISes sent due to a COMRESET
0x0001 2 0 Command failed due to ICRC error
0x0003 2 0 R_ERR response for device-to-host data FIS
0x0004 2 0 R_ERR response for host-to-device data FIS
0x0006 2 0 R_ERR response for device-to-host non-data FIS
0x0007 2 0 R_ERR response for host-to-device non-data FIS
Top
Profilo Invia messaggio privato
Maary79
Moderatrice Sistemi Operativi e Software
Moderatrice Sistemi Operativi e Software


Registrato: 08/02/12 12:23
Messaggi: 6984

MessaggioInviato: 11 Ott 2018 16:56    Oggetto: Rispondi

Mi sembra ci sia qualche errore...ma non me lo ricordavo così complicato.
È molto più semplice l'utilità 'dischi' di cui ti ho parlato sopra.
Riesci a fare un live di Linux come indicato su?

Mi serve una schermata dei soli dati smart. Il test lo fa in automatico. O fallisce o passa, non c'è molto da interpretare.

L'immagine la puoi poi postare con tynipic:link
Catturandola premendo il tasto stamp (oppure 'schermata', sul menù) e sempre dal live trovi Firefox, per postarla direttamente.
E poi fai, sempre con quel disco il mem test (non dal live, ma nella prima fase di boot del supporto USB o DVD).
Top
Profilo Invia messaggio privato
Mostra prima i messaggi di:   
Nuovo argomento   Rispondi    Indice del forum -> Dal processore al case Tutti i fusi orari sono GMT + 1 ora
Pagina 1 di 1

 
Vai a:  
Non puoi inserire nuovi argomenti
Non puoi rispondere a nessun argomento
Non puoi modificare i tuoi messaggi
Non puoi cancellare i tuoi messaggi
Non puoi votare nei sondaggi